NVR user manual - Kamery IP

Advanced Mode:The advanced mode consists of the event and action sections. You can define theaction to take for each event triggered on the IP cameras or the video serversconnected to the NVR.To configure the advanced event management by the “Advanced Mode”, select anevent type on the left channel list and configure the actions to take on the right.Note: Click “Apply” to apply the settings or “Exit” to exit the settings page. If the“Advanced Mode” is selected on the “Alarm Settings” page, the advancedsettings will be applied after the NVR restarts even if you have selected to exitthe settings page. The settings will be cancelled if you select to use “TraditionalMode” after exiting the “Advanced Mode”. To avoid blocking by the firewall, the IP cameras or the video servers configuredfor the alarm recording must be located on the same subnet as the NVR. To switch from the advanced mode to the traditional mode, select “TraditionalMode” and click “Apply”.146