Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
USER MANUAL<strong>BEAT</strong>-<strong>HF</strong>IMPORTANT NOTES !Checking the terminals of the connecting cables to the fitting beforestarting up the unit is advised. There are different types of adaptersdepending on the type of fitting to be used. Refer to clause 3.4.1 Fittingconnection.S.N. xxxx<strong>BEAT</strong>-<strong>HF</strong>GRUPO ACUSTERV. v.vvThe display backlight will be enabled, an acoustic signalheard and the following information will appear:<strong>BEAT</strong>-<strong>HF</strong>: modelS.N. xxxx: unit serial numberV. v.vv: software versionOnce the display time has elapsed (3 seconds), the unit will display the correspondingscreen (depending on the setup and initial messages).Possible initial messages:MEMORY FULLIf the capacity of the memory is already full, the display will show the following message:dd/mm/yyMemory fullhh:mmExport or/and eraser fusion records: refer to clause3.5.3 of this Manual.Fusion impossibleTECHNICAL MACHINE SERVICEIf the programmed warning date for the Technical Machine Service in the unit has expired,the display will show:dd/mm/yyhh:mmService valid untildd/mm/yyyyConfirmThe unit will emit twoacoustic signals and amessage will appear inthe display along with thedate of the next check.dd/mm/yy hh:mmService valid untildd/mm/yyyyIf the date dd/mm/yyyy has not expired yet, press to Confirm and proceedto the next screen (regardless of the existing locking set up of the unit).If the date dd/mm/yyyy has already expired but the unit is set up without locking, bypressing you will be able to move to the next screen. However, if the unit is setup with locking, the display screen won’t show the Confirm option and subsequently theunit will not be able to be used until the TMS has been carried out.16Edition: April 2012- MODE OF USE Revision: No. 2
Change language