You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
USER MANUAL<strong>BEAT</strong>-<strong>HF</strong>1.2 DESIGN SPECIFICATIONSThe electrofusion units <strong>BEAT</strong>-<strong>HF</strong> are designed according to the following specifications: ISO 12176-2 Equipment for fusion jointing polyethylene systems.Part 2: Electrofusion. ISO 12176-3 Equipment for fusion jointing polyethylene systems.Part 3: Operator's badge. ISO 12176-4 Equipment for fusion jointing polyethylene systems.Part 4: Traceability coding. ISO/TR 13950 Plastic pipes and fittings: automatic recognition ofelectrofusion systems.The <strong>BEAT</strong>-<strong>HF</strong> accepts all the identifications which correspond to the above listedSpecifications. All the fittings can be fused by electrofusion if the manufacturer enclosesthe programmed bar code system in accordance with ISO/TR 13950.1.3 GENERAL INFORMATIONThe development, documentation, production, tests and shipping of the products herewithdescribed have been made:MMComplying with the respective safety rules, andIn accordance with the requirements of quality guarantee.WARNING !The electrofusion control box can only be opened by Grupo <strong>Acuster</strong> AftersalesService. In the case of the back cover opening or coming apart,parts of electrical components which are not covered may be leftexposed.Only qualified personnel are authorised to intervene both for fusion andrepairs. These qualified personnel must be familiar with all the safetymeasures, potential dangers and maintenance rules described in thisManual.The safe use of the products described requires an appropriate means oftransport, storage, installation and use, a careful handling and thepreestablished periodical maintenance follow-up.6Edition: April 2012- INTRODUCTION Revision: No. 2
Change language