MU-78-10 BEAT-HF - Acuster Bahisa

USER MANUALBEAT-HF3.3.3 Entering the job number: only if enabledIf the entry of the job is enabled, the unit allows different setups of entry: Optional set up of job:- It can be omitted by selecting the Skip over and pressing the button.- It can be entered using a barcode or manually. Obligatory job set up:- It must be entered without choice.- It can be entered by using a barcode or manually. Set up of time of entering:- If it is set up as OFF, the job number will be saved throughout the day until zerohours of the next day. The job number can be modified or erased at any stage.- If it is set up as ON, the job number will be lost each time the unit is turned off.It will need to be reintroduced.After entry of the operator ID, or not, or if not enabled, when the unit is turned on thefollowing screen will appear:If a job number has been previously introduced:Initial screen: Next screen:dd/mm/yyhh:mmJobABCDEFGHIJKLMNOPConfirmPress either the or arrow once to select theErase screen.dd/mm/yy hh:mmJobABCDEFGHIJKLMNOPErasePress to confirm and go to the next screen or select Erase if the job numberneeds to be altered.If a job number has not been introduced or erased previously:Initial screen: Next screen : Final screen :dd/mm/yyhh:mmJob----------------Read barcodedd/mm/yy hh:mmJob----------------Manual editiondd/mm/yy hh:mmJob----------------Skip over22Edition: April 2012- MODE OF USE Revision: No. 2