Axis 215 User Guide - CHPC Wiki

More documents

Recommendations

Info

AXIS 215 PTZ/AXIS 215 PTZ-E - TroubleshootingVideo Image ProblemsDistorted colorsImage too dark or too lightProblems uploading own filesMissing images in uploadsSlow image updateSlow performanceBad snapshot imagesDisplay incorrectly configured on yourworkstationAudio problems (AXIS 215 PTZ only)No audioNo full-duplex functionPoor performanceWhining or screeching sound from speakers(feedback)Mechanical problemsproblem with pan, tilt, zoom mechanicsProblems may occur if the image contains no white color at all, or if the dominant color is not white. In these circumstances,the white balance may incorrectly be based on another visible color in the image, and colors may become distorted.A pale background picture with reddish or blue foreground objects is very symptomatic of this condition. Insuch cases it is recommended that a fixed white balance setting is selected.See the help on Video & Image Settings.There is only limited space available for the upload of your own files. Try deleting one or more existing files, to free upspace.This can occur when trying to use a larger image buffer than is actually available. Try lowering the frame rate or theupload period.Configuring, e.g. pre-buffers, hi-res images, high frame rate etc will reduce the performance of the AXIS 215 PTZ/AXIS215 PTZ-E.Slow performance may be caused by e.g. heavy network traffic, many users with access to unit, low performing client,use of features such as Event handling., Image rotation.In Display Properties, configure your display to show at least 65000 colors, i.e. at least 16-bit.Using only 16 or 256 colors on your display will produce dithering artifacts in the image.Check that:• PC sound card, speakers and microphone are correctly connected• the Mute button is not pressed• the volume in and volume out settings are correct• all cabling is connected• the value of the Post Content Length in your proxy server is 1MB or more. You may need to contact your systemadministrator to do this.Incorrect configuration. Check the setting in the camera’s Setup pages.Sound card does not support full-duplex. For information on how to check if your sound card supports full-duplex,please visit www.axis.com and see the support section for Axis camera products.Too many users/clients connected. Try limiting the number of clients allowed to connect.Low bandwidth. Reduce the Speed setting on the Audio settings page. Setting lower speed will reduce any break-up inthe sound, but will also increase the transmission delay. If running in Full-Duplex mode, try switching to Half-Duplexmode.Poor positioning of speakers and/or microphone. Relocate the speakers or microphone so that they do not pointtowards each other, and/or lower the volume.Click the PTZ Status - Test button under System Options > Maintenance to check the pan, tilt, zoom mechanics andcamera for errors. If you receive an error message as the result of this test, contact Axis Customer Services atwww.axis.com/techsupFor additional assistance, please contact your reseller or check the product’s support pages on the AxisWebsite at http://www.axis.com/techsup40
Technical SpecificationsAXIS 215 PTZ/AXIS 215 PTZ-E - Technical SpecificationsItemSpecificationModels• AXIS 215 PTZ - 60Hz• AXIS 215 PTZ - 50Hz• AXIS 215 PTZ-E 60Hz(NTSC)• AXIS 215 PTZ-E 50Hz (PAL)Image sensor1/4” sony Interlaced CCDLensF1.6-F2.7f=3.8-46mmAutomatic day/nightAutofocusFocus range: 300 mm (wide) or 1000 mm (tele) to infinityAngle of view4.4° - 51.6° horizontalZoom12x optical and 4x digital, total 48xMinimum illumination Color: 1 lux at 30 IRE, F1.6B/W: 0.3 lux at 30 IRE, F1.6Pan Range+/-170° (360° panning via Auto-flip)Tilt Range 180°Max speedPan: 180°/secTilt: 140°/secVideo compression Motion JPEGMPEG-4 Part 2 (ISO/IEC 14496-2), ASP level 0-5, SP level 0-3Resolutions4CIF, 2CIFExp, 2CIF, CIF, QCIFMax 704x480 (NTSC) 704x576 (PAL)Min 176x120 (NTSC) 176x144 (PAL)Frame rate(NTSC/PAL)Video streamingImage settingsPan/tilt/zoomMotion JPEG:Up to 30/25 fps in all resolutionsMPEG-4 (AXIS 215 PTZ):• Up to 30/25 fps at 2CIF/CIF/QCIF• Up to 25/21 fps at 4CIF/2CIFExpMPEG-4 (AXIS 215 PTZ-E)• Up to 30/25 (NTSC/PAL) in 2CIF/CIF/QCIF• Up to 26/22 (NTSC/PAL) in 4CIF/2CIFExpSimultaneous Motion JPEG and MPEG-4Controllable frame rate and bandwidthConstant and variable bit rate (MPEG-4)3GPP and ISMA compatibleDe-interlace (4CIF resolution)Compression levels: 100Rotation: 0°, 180°Aspect ratio correctionConfigurable white balance, exposure control, brightness, sharpness and color modeOverlay capabilities: Zone ID, preset ID, time, date, PTZ coordinates, text or imageAutomatic or manual day/night modeBacklight compensationAuto-flipE-flip20 preset positionsSequence modeControl queueImage freezeSupports Windows compatible joysticksDesigned for operator control**Not designed for continuous PTZ movements e.g. Guard tour. For continuous movement, please see Axis networkdome offering41
Page 3: AXIS 215 PTZ/AXIS 215 PTZ-E - Table
Page 7 and 8: AXIS 215 PTZ/AXIS 215 PTZ-E - Acces
Page 9 and 10: AXIS 215 PTZ/AXIS 215 PTZ-E - Video
Page 11 and 12: AXIS 215 PTZ/AXIS 215 PTZ-E - Setup
Page 15 and 16: Audio Settings (AXIS 215 PTZ only)T
Page 23 and 24: Event ConfigurationAXIS 215 PTZ/AXI
Page 25 and 26: AXIS 215 PTZ/AXIS 215 PTZ-E - Event
Page 27 and 28: AXIS 215 PTZ/AXIS 215 PTZ-E - Syste
Page 35 and 36: AXIS 215 PTZ/AXIS 215 PTZ-E - Unit
Page 37 and 38: AXIS 215 PTZ/AXIS 215 PTZ-E - Troub
Page 39: Symptoms, Possible Causes and Remed
Page 43 and 44: AXIS 215 PTZ/AXIS 215 PTZ-E - Techn
Page 45 and 46: Important!AXIS 215 PTZ/AXIS 215 PTZ
Page 47 and 48: AXIS 215 PTZ/ AXIS 215 PTZ-E - Glos
Page 53: AXIS 215 PTZ/AXIS 215 PTZ-E - Index

Axis 215 User Guide - CHPC Wiki

Create successful ePaper yourself

Delete template?

Save as template?