Cubasis VST 4.0 – Manual - School of Computing, Engineering and ...

6. In the VST Channel Mixer window, click on the FX button for the audiochannel to which you want to add the effect.The VST Channel Settings window opens, as described on the previous pages. Thesection between the channel fader and the EQ modules contains the effect sends.Bypass button (affects both sends)Pre-fader Send switchSend On/OffSend level7. Click on the On button for one or both effect sends and turn the Sendlevel knobs to moderate values.When you activate the On button, the channel’s FX button will light up in the VSTChannel Mixer.8. If you want the signal to the effect to be independent of the channelfader setting, click on the PRE button for the send.With Pre-fader effect sends, the amount of effect for the channel is not affected by thevolume fader. With Post-fader effect sends (PRE button not activated), the amount ofeffect is proportional to the channel volume, and will change with the volume fadermovements. This is the most common setting.If you activate playback, you should hear the selected effect(s) beingadded to the sound. At this point, you will probably want to try out thedifferent effect programs and make settings for the selected effects.This is described below.CUBASIS VST13 – 204 Mixing