Cubasis VST 4.0 – Manual - School of Computing, Engineering and ...

Normalizing one or all TracksThis is how you normalize one track in your Track List:1. Select the desired track in the Track List by clicking on it.The corresponding line in the Track List will be highlighted.2. Select “Normalize selected Track” on the Normalize menu.A dialog box appears, where you can confirm the action by clicking “Yes” or cancel itby clicking “No”. If you click “Yes”, the calculation starts immediately.This is how you normalize all tracks in your Track List:• Select “Normalize all Tracks” on the Normalize menu.A dialog box appears, where you can confirm the action by clicking “Yes” or cancel itby clicking “No”. If you click “Yes”, the calculation starts immediately.Recording the CD-RWhen you have prepared all files in your current project by using theProcessing and possibly the Normalizing functions or if you have notprocessed and instead manually set them to “ready” status, you canrecord them onto CD-R.1. To do this, open the CD-R menu and select “Create CD-R…” to bringup the following dialog:The table below lists all items in this dialog. Which items are available depends on yoursystem.ItemCD writerburning trackDescriptionIf your system detects a CD recorder, this field will display its typedesignation. If the CD recorder is not found, a message will appear.Make sure that the CD recorder is correctly connected and that itspower switch is On. Then let Master Unit scan your system again byclicking on the “rescan” button.During the writing process, Master Unit shows you which track is currentlywritten. The red bar next to this field informs you about howmuch of the complete CD has already been written.CUBASIS VSTThe Master Unit Program 20 – 369