Cubasis VST 4.0 – Manual - School of Computing, Engineering and ...

Additional Audio SettingsWhile you’re in the Audio System Setup dialog, you need to make afew additional settings:1. If you like, adjust the Number of Channels value.The number of audio channels determines how many audio recordings you can playback at the same time (with stereo recordings using two audio channels). You can alwaysadjust this value later if needed.❐How many channels you will actually be able to use depends on your computer’sprocessing power, the speed of the hard disk and other factors.2. Make sure Audio Clock Source is set to Internal for now.Depending on your audio hardware, there may be other options on this pop-up menu,allowing you to synchronize the sample rate to an external source. For example, if yourecord audio from digital inputs on your audio hardware, you should select the correspondingoption on this pop-up menu, so that Cubasis VST’s sample rate is properlysynchronized to the device producing the digital signal (see the hardware and ASIOdriver documentation for details).3. Leave the Disk Cache Scheme setting as it is for now.This determines how Cubasis VST transfers audio data to and from disk. If you get performanceproblems, you should try selecting another Disk Cache Scheme.4. Click OK to close the Audio System Setup dialog.CUBASIS VSTSetting up your System 5 – 43