IDN Document - ICT

• Documentation may be related to any site, or multiple sites. Their location and other details arenot required to be disclosed.• Documentation may even be made specifically for the purpose of the IDN application processas long as what is shown is typical of a normal access control project.Acceptable documentation formats include: Microsoft Word, Excel, Visio. PDF Documents,AutoCAD DXF or DWG.The applicant must supply the following documentation.5.2.1. Typical access controlled door wiring diagram to demonstrate standards 4.2.1, 4.2.6,4.2.7, 4.2.8 and 4.2.9.(a) Diagram should include control equipment termination, field device termination,including lock, reed switch, reader(s), REX and emergency door release.(b) Cable type(s) should be indicated.(c) Conductor colors should be labeled.5.2.2. Power supply loading calculations to demonstrate standard 4.3.5.5.2.3. Voltage drop calculations to demonstrate standard 4.2.9.5.2.4. Cable Schedule to demonstrate standards 4.1.3, 4.1.4 and 4.4.1.d.5.2.5. Site Plan to demonstrate standards 4.4.1.b and 4.4.1.c.5.2.6. Hardware Schedule to demonstrate standard 4.4.1.e.5.2.7. End user system operating manual to demonstrate standards 4.4.2.5.3. Reference SitesThe applicant must supply three reference sites, where an end user may be contacted by an ICTrepresentative to assess their overall satisfaction of the installation and their understanding of whatcan be done with the system (if applicable).This is to demonstrate standard 4.5.1 and 4.5.2.16 IDN ICT Dealer Network Terms and Conditions | January 2014