Automotive Refinishing Policy Manual - Sacramento Metropolitan Air ...

Authority to Construct EvaluationA/C XXXXXFebruary 13, 2012Page 7PollutantLevel of Significancetons/yearCO 100NOx 40SOx 40PM 25PM10 15PM2.510 (PM2.5) or 40 (SO 2 ) or 40 (NO)Ozone40 (NOx or VOC)Lead 0.6Fluorides 3Sulfuric Acid Mist 7H 2 S 10Total Reduced Sulfur (including H 2 S) 10Reduced Sulfur Compounds (incl. H 2 S) 10Greenhouse Gases (CO2e) 75,000A more detailed PSD analysis is not required because the contemporaneous emissionsincreases for all pollutants at the facility do not exceed any of the significance levelsshown in the table above.4. PROHIBITORY RULES COMPLIANCE:Rule 401 – Ringelmann ChartThe automotive coating operation at this facility is expected to comply with the RingelmannNo. 1 or 20% opacity requirement of this rule.Rule 402 – NuisanceThe automotive coating operation to be conducted at this facility is not expected to causea public nuisance and will not emit any significant levels of toxic air contaminants.Rule 459 – Automotive, Mobile Equipment, and Associated Parts and ComponentsCoating OperationsXXX Auto Body is proposing to use Matrix and PCL coatings that are compliant with theFeb. 25, 2012 VOC standards in Sections 301 and 302 and the equipment requirements.This source will be required to demonstrate compliance with the standards with monitoringand recordkeeping procedures pursuant to Section 502 and as stated in the permitconditions.