Automotive Refinishing Policy Manual - Sacramento Metropolitan Air ...

777 12 TH STREET, 3 RD FLOOR (916) 874-4800SACRAMENTO, CA 95814-1908 FAX (916) 874-4899SACRAMENTO METROPOLITANAIR QUALITY MANAGEMENT DISTRICT16. For all booths, including dry filter-type and waterwash-type, the exhaust fan system shall be in operationwhenever spraying occurs in the booth.[Basis: SMAQMD Rule 201, Section 405]RECORDKEEPING17. The following records shall be continuously maintained on-site for the most recent three-year period andshall be made available to the Air Pollution Control Officer upon request. Monthly and quarterly recordsas specified in the table below shall be made available for inspection within 30 days following the monthand quarter, respectively.[Basis: SMAQMD Rule 201, Section 405 and Rule 459, Sections 401 and 502]FrequencyAt all timesInformation To Be RecordedList of currently used coatings and solvents including the following information:A. The material name and manufacturerB. The application method usedC. The coating type as designated by the coating categories in SMAQMD Rule 459,Section 301 or 302 and mix ratio specific to the coatingD. Identification of the material as a coating or a solventE. Product data sheeti. For coatings and coating components:a. The volatile organic compound regulatory content for coatings expressed ingrams per liter, calculated pursuant to SMAQMD Rule 459, Section 407.b. The volatile organic compound actual content for coatings expressed ingrams per liter, calculated pursuant to SMAQMD Rule 459, Section 408.c. The weight percentage of volatiles, water and exempt compounds.d. The volume percentage of water and exempt compounds.e. The density of the material (in grams per liter).f. For coatings and coating components containing tertiary butyl acetate, theactual content of tertiary butyl acetate per total volume of coating or coatingcomponent, expressed in grams per liter.ii. For each individual ready to spray mixture (based on the manufacturer’s andrepackager’s stated mix ratio):a. The volatile organic compound regulatory content for coatings expressed ingrams per liter, calculated pursuant to SMAQMD Rule 459, Section 407.b. The volatile organic compound actual content for coatings expressed ingrams per liter, calculated pursuant to SMAQMD Rule 459, Section 408.c. The weight percentage of volatiles, water and exempt compounds.d. The volume percentage of water and exempt compounds.e. The density of the material (in grams per liter).f. For each ready to spray mixture containing tertiary butyl acetate, the actualcontent of tertiary butyl acetate per total volume of the mixture, expressed ingrams per liter.iii. For coating removers and solvents subject to Condition No. 10:a. The volatile organic compound content as calculated pursuant to SMAQMDRule 459, Section 409.PAGE 5 OF 9 PAGESREVOCABLE AND NON-TRANSFERABLEPERMIT NOS.: XXXXX