Series MB - SMC Pneumatics (Ireland)

Series MBMade to Order SpecificationsContact SMC for the detailed specifications, delivery and prices.OrderMade1Oversized Rod Cylinder-XB5A cylinder that has been made stronger through the use of a piston rod with a largerdiameter. It is used for long stroke applications that pose the risk of bending orbuckling of the piston rod. (Consult with SMC if a lateral load must be applied to it.)MBSpecificationsActionBore size (mm)Auto switchDimensionsDMMStandard model no.Width across flatsEffectivethreadA KHZZ + StrokeXB5Strong rod cylinderDouble acting single rod32, 40, 50, 63, 80, 100Available for mountingCushion valveWSpecial Port Position4 -XC3Cylinder changed connecting port position of rod/head cover and positionof cushion valve.MBMBWMBKMBQStandard model no.Special port positionXC3Port position seen from the frontRelation between Port Position and Cushion Valve PositionPortDACushionvalveBPortACCushion valveposition seen fromthe frontCushionvalve PortCushionvalve PortA A ACCCCBasic Foot Front flange Rear flangeCushionCushionCushionPort valve Port valve Port valveDABAACushionvalveD D DB B BDBDBBore size(mm)3240506380100Effectivethreadlength273237373747Widthacrossflats141822222631A303540404050D162025253036H515868687490K6710101016MMM14 X 1.5M18 X 1.5M22 X 1.5M22 X 1.5M26 X 1.5M30 X 1.5W7.29.710.5121415ZZ139146166166192208CCCSingle clevis Double clevis Center trunnionAs shown in the above diagram, the symbols for the positions of the portsand cushion valves are as follows: viewed from the rod side, the top positionis rendered A; then, B, C, and D, in the clockwise direction.The style in which the ports and the cushion valves are combined isapplicable only when the rod cover and the head cover are changed to thesame positions.The part number "XC3AA" does not exist with regard to the port and cushionvalve positions, because this is the standard specification.Heat Resistant Cylinder (150°C)2 -XB6An air cylinder in which the materials of the seals and the grease havebeen changed so that the cylinder can be operated at high ambienttemperatures of up to 150°C.MB Standard model no. XB6SpecificationsActionAmbient temp.Auto switchCushionMaterialGreaseHeat Resistant Cylinder (150°C)Double acting single rod/double rod–10°C to 150°CUnavailable for mountingAir cushionFluorine rubberHeat resistant greaseThe specifications and dimensions other than the above are the same as thoseof the standard type.5With Heavy Duty Scraper-XC4As it uses a powerful scraper for the wiper ring, this cylinder is suitable for use in anarea that is dusty, or in an environment in which mud splashes on the cylinder, such aswhen operating casting equipment, construction equipment, or an industrial vehicle.MB Standard model no.MBWSpecificationsActionCushionWiper ringXC4With Heavy Duty ScraperDouble acting single rod/double rodAir cushion/Rubber bumperSCB scraperThe specifications other than the above are the same as those of the standardtype.Dimensions3Low Speed Cylinder-XB13 (5 to 50mm/s)Operates smoothly without sticking or slipping even at low speeds of 5 to50mm/s.Note 1) Do not lubricate this cylinder.MB Standard model no.MBWSpecificationsActionPiston speedXB13Low Speed CylinderDouble acting single rod/double rod5 to 50mm/secHBore size (mm)324050FF151719H475867ZZ + StrokeZZ135146165Bore size (mm)6380100F192525H678181ZZ165199199The specifications and dimensions other than the above are the same as thoseof the standard type.41