Manual - AEQ International

D1.2. Graphics Config.Enables a graphic view of the response of the DLP, and of its configuration.D1.2.1. Points.In this submenu you can select as many as four points that configure the response to the DLPprocessor. For each of the points you will have to establish the associated input and outputlevels.D1.2.2. Options.Points submenuBasically, the Options submenu lets you define the operating and transition levels. The workingunits are always dB.• Operation Level: Operation level. Defines the area of the level spectrum inwhich you are going to operate. Basically, this is not useful.• Transition Level: Transition level. This is a key point in DLP operation. Thetransition level separates the point where you wish to distinguish a limiter froma compressor and / or expander.Options submenuAEQ PHOENIX MOBILE101