Pro/DIAGRAM Help Topic Collection - To DataJett.com

Pro/DIAGRAM - Help Topic Collection
4
drawing setup file options:
draw_attach_sym_height
draw_attach_sym_width
draw_dot_diameter
draw_attach_sym_height Sets the height of leader line slashes, integral
signs, and boxes. If you specify default, uses
the value set for draw_arrow_width.
draw_attach_sym_width Sets the width of leader line slashes, integral
signs, and boxes. If you specify default, uses
the value set for draw_arrow_width.
draw_dot_diameter Sets the diameter of leader line dots. If you
specify default, uses the value set for
draw_arrow_width.
leader_elbow_length Determines the length of the leader elbow
(the horizontal leg attached to the text).
decimal_marker Determines which character marks the
decimal point in secondary dimensions.
drawing_units Sets the units for all drawing parameters.
line_style_standard Controls text color in drawings. Unless you
set this option to STD_ANSI, shows all text in
drawings in blue, and shows the boundary of
the detail view in yellow.
max_balloon_radius Sets the maximum allowable balloon radius.
If set to 0, balloon radius depends only on
text size.
min_balloon_radius Sets the minimum allowable balloon radius. If
set to 0, balloon radius depends only on text
size.
sym_flip_rotated_text Flips any text in a Rotate Text symbol that
is upside down, making it right-side up. If set
to yes. and the symbol orientation is +/- 90
degrees, flips the text, rotating it along with
the symbol.
text_thickness Sets the default text thickness for new text
after you regenerate and existing text whose
thickness has not been modified. Enter the
value in drawing units.