Pro/DIAGRAM Help Topic Collection - To DataJett.com

Pro/DIAGRAM - Help Topic Collection
36
text. For example, &cable_name
has no special meaning.
CABLE_SHIELD_REPORT_NAME Use this name for the cable
symbol if the cable is shielded.
The default value is SHIELD.
CABLE_NODE_REPORT_NAME Use this name for the nodes of a
cable symbol. The default value
is "-".
SHIELD_LINEAR_RESISTANCE Specifies linear resistance of the
wire's shielding.
OUTER_SHIELD_LINEAR_RESISTANCE Specifies linear resistance of the
wire's outer shielding.
LIN_CAP_TO_ITEM Specifies linear electric capacity
between items.
LIN_CAP_ITEM_TO_SHIELD Specifies linear electric capacity
between items and shield.
LIN_CAP_ASSEM_ITEM_TO_SHIELD Specifies linear electric capacity
between assembly items and
shield.
OUTER_SHIELD_THICKNESS Specifies thickness of the outer
shielding of the wire.
Individual Wire and Cable Parameters
The following table lists the available parameters for individual wires and cables.
These parameters are established when the wire or cable is created, but are not
passed from the spool.
NAME Indicates the name of the wire or cable. This
value is read-only in the parameter field and
is created automatically upon creation of a
wire or cable. Click Edit > Value to change
the name of the wire or cable. The value of
this parameter updates automatically in the
file.
Format: NAME read-only_string
Example: NAME CABLE0001
SPOOL Indicates the spool used for a wire or cable.
This value is read-only and is created
automatically upon creation of a wire or
cable. Select the wire or cable and click Edit