Pro/DIAGRAM Help Topic Collection - To DataJett.com

Pro/DIAGRAM - Help Topic Collection
40
&cond_name—Shows the name of the spool conductor that has been assigned to
that wire.
&cond_—Shows a specific spool conductor parameter for that
wire’s assigned conductor, for example, wire construction, color, user-defined,
and so on.
Note: You can set Pro/DIAGRAM to show the cable name and conductor number for
a wire assigned to a cable by default. If you set the drawing configuration option
cond_name_from_cable to YES, the wire label shows the cable name and conductor
name instead of the wire name for any wires added to a cable and assigned a
conductor number.
For Cable Symbols
You can enter &cbl_name, &cbl_, &spool_name, and
&spool_ for note to display the cable name, spool name, or any
cable or spool parameter.
Showing Diagram Parameters for Wire Breakpoints
Parametric wire notes can be attached to wiring breakpoints. Use the configuration
option def_wire_break_label to create a default wire breakpoint note. When a
variable is entered for this option, all subsequent breakpoints are automatically
created with a note that contains the defined variable.
In addition to all existing wiring parameter symbols, such as &wire_name, the
following parametric symbols can be included in the note:
&wire_opp_sheet—Displays the sheet number where the wire routing resumes.
&wire_opp_sym—Displays the reference designator of the symbol where the wire
terminates.
&wire_opp_node—Displays the terminating node name.
&wire_opp_item—Displays the reference designator of terminating symbol or
name of terminating rail.
Defining Label Contents
Use the setup option pc_ident_label to define a pattern of parameters used as
contents of a label for the note on a parametric connector.
For example, if you set the value of pc_ident_label in the setup file to &first-
&second-&third, add the parameters first, second, and third to the parametric
connector with the values of Parametrics, Designer, and Refdes, respectively, the
label for the parametric connector becomes Parametrics - Designer - Refdes.
To Set Up Label Contents by Pattern
1. Click Tools > Parameters > Pattern. The PARAM PATTERN menu appears.