triad® electronic ballasts - Conserve-A-Watt Lighting, Inc

Understanding Universal Part NumbersMAGNETICOur part number nomenclature for magnetic ballasts isshown below:1 – 120V2 – 277V3 – 347VOdd = NPFEven = HPFThermallyProtected4XXX XX P XXX XXX XF1 – FrameF2 – Fr. w/feetH2 – Cover/Fr.Color:001 – White000 – BlackNo suffix – Side ExitBE – Bottom ExitBES – Bottom Exitwith StudsC – CartonT – Tray PackExample: 4123PBES000TBallast for CFL Lamps: Indicated by “4” prefixVoltage: 120VLamp Type: 26W Quad Lamp (refer to catalogfor wattage)Power Factor: NormalEncased and Potted: Indicated by absence of F1, F2,or H2)P: Thermally protectedBES: Bottom exit leads with studs000: Color—BlackT: Packaging container style—Tray PackThese ballasts are available for a wide variety of applicationswith lamps, voltages, mounting configurations, andperformance characteristics. For more detailed information,just identify the lamps to be ballasted and work forward todetermine the ballast part number.ELECTRONICOur nomenclature for electronic CFL ballasts follows thesystem already in place for other Universal electronic ballasts.The exceptions are that the model numberprefix for compact fluorescent is a C rather than aB—and the suffixes for the mounting configurationwill be the same as those used for magnetic products (BEand BES). If you don’t see these suffixes, the ballast hastraditional side exit leads.Example:Electronic C240PUNVHP-BBallast Type: C — CFL Electronic BallastLamp Qty: 2Lamp Type: 40W TT5, 4 Pin (FT40W/2611)P: Programmed Rapid StartVoltage: UNV 120 to 277 voltsHP-B: High Performance