C2-Sewage Pumps DN 32 to DN 600 - 2008.pdf

Sewage Pumps for Building ServicesSubmersible motor pumps without maceratorTechnical data Wilo-EMU FA 08…Wilo-EMU FA 08…MotorProtection class with maximum submersion depth IP 68 IP 68 IP 68 IP 68 IP 68 IP 68 IP 68 IP 68 IP 68Insulation class F F F F F F F F FSwitching frequency [1/h] +15 15 15 15 15 15 15 15 15PumpSubmersion depth, maximum [m] 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5Fluid temperature [°C] 40 40 40 40 40 40 40 40 40Fluid temperature briefly possible [°C] 60 60 60 60 60 60 60 60 60Density of the fluid, maximum [kg/m 3 ] 1030 1030 1030 1030 1030 1030 1030 1030 1030Cable typeH07 RN-F, roundPower lead-in: NSSHÖU-JControl cable: NSSHÖU-OCable length [m] 10 10 10 10 10 10 10 10 10Cable cross-section 3~400 V [mm 2 ] 7G1.5 7G1.5 10G1.5 10G1.5 10G1.5Type of power cable.43-120E + T 13-2/12HRubber hose lineActivation type direct star/delta.43-135E + T 13-2/12HPower lead-in: 2x(4x2.5)Control cable:7x1.5Oil volume gasket housing [l] 0.55 0.55 0.55 0.55 2 3.3 3.3 3.3 3.3Ex protection – – – – – – – – –Free ball passage [mm] 70 70 70 70 80 80 80 50 50.43-135E + T 13-2/16H.43-150E + T 13-2/16H.73-160W + T 17-2/22H.73-160W + T 20.1-2/22G.73-170W + T 20.1-2/22G.66-195W + T 20.1-2/22GSubmersible Motor Pumpswith MaceratorSubmersible Motor Pumpswithout MaceratorElectrical AccessoriesWilo-DrainDimensionsPressure port DN 80 80 80 80 80 80 80 80 80Weight [kg] 55 55.5 59 59.5 119 199 199.5 198 198MaterialsFlag4Flag5.66-210W + T 20.1-2/22GPump housingEN-GJL-200Impeller EN-GJS-500-7 EN-GJL-200 EN-GJS-500-7Shaft 1.4021 (AISI 420)Mechanical seal (bidirectional)on pump side SiC/SiC SiC/SiC SiC/SiC SiC/SiC SiC/SiC SiC/SiC SiC/SiC SiC/SiC SiC/SiCStatic sealson the motor end – – – – – SiC/SiC SiC/SiC SiC/SiC SiC/SiCFPM/NBRFPM/NBRRotary shaft seal, on motor side FPM FPM FPM FPM FPM – – – –Motor housingFPM/NBRFPM/NBRFPM/NBREN-GJL-200FPM/NBRFPM/NBRFPM/NBRFPM/NBR• = available or authorised, – = not available or not authorisedWilo Catalogue C2 – 50 Hz – Sewage Pumps DN 32 to DN 600111