C2-Sewage Pumps DN 32 to DN 600 - 2008.pdf

Sewage Pumps for Building ServicesSubmersible motor pumps without maceratorSeries description Wilo-Drain TP 80, 100, 150ConstructionSubmersible sewage pump as submersible monobloc unit for verticalwet sump installation or vertical dry sump installation-Inox & Composite-Ex protection as standard equipment (for connection with TWC andcompletely submerged hydraulics. Follow instructions in the installationand operating instructions)- low weight-leakage detection-sheath current cooling- detachable connection cable- large, free ball passage- resistant to corrosion and wear and tearSubmersible Motor Pumpswith MaceratorWilo-Drain TPSubmersible sewage pumpType keyExample: Wilo-Drain TP 100 E 210/52TP Submersible motor pump100 Nominal diameter [mm]E Impeller shape:E = single-channel impellerF = vortex impellerM = multi-channel impeller210 Nominal diameter of the impeller [mm]/52 Power P 2 [kW] = value/10 = 5.2 kWApplicationWilo-Drain TP80 to 150 submersible motor pumps are suited forpumping faeces, municipal and industrial sewage, even with longfibreconstituents, for- house and site drainage- sewage and water management- environmental and water treatment technology- industrial and processing technologyHigh operational safety because of optimal free ball passage. Alsosuitable for emergency/catastrophe utilisation because of its lowweight.Can be utilised in the following installation types-stationary wet-portable wet- vertically dry (without Ex-protection)- horizontal dry installation on demandMotorThree-phase asynchronous motor 3~400 V, 50 Hz, protection classIP 68, leakage detection, thermal winding contacts. Insulation class F.Other operating voltages and frequencies available on request.CautionWhen connecting the SK 545 switchgear tripping unit that is providedonsite by the customer (see electrical accessories), use for connectingthermal winding contact (TWC) and leakage detection (TWCconnection is with a maximum of 30 V, max. 30 mA, observe installationand operating instructions).Bearing configurationBearing configuration of the motor shaft in permanently lubricated,low-maintenance roller bearings.Motor coolingPermanently blockage-free sheath current cooling with patentedreturn flow pipe.Radial shaft sealing ringDouble direction of rotation-independent mechanical seal on thepump and motor sides.Leakage detectionSignal concerning moisture seepage in the motor space.HydraulicsStandard-equipped with patented spiral floor plate for blockage-freereliable permanent operation (single-channel impeller).TP 80: Single-channel impeller/vortex impellerFree ball passage 80 mmTP 100: Single-channel impeller/vortex impellerFree ball passage 95/100 mmTP 150: Single-channel impeller/multi-channel impellerFree ball passage 100/125 mmSubmersible Motor Pumpswithout MaceratorElectrical AccessoriesWilo-DrainFlag4Scope of deliveryPump ready for connection with 10 m connection cable, bare cableend and installation and operating instructions. Other cable lengthson request.Flag5Wilo Catalogue C2 – 50 Hz – Sewage Pumps DN 32 to DN 60091