C2-Sewage Pumps DN 32 to DN 600 - 2008.pdf

Sewage Pumps for Building ServicesSubmersible motor pumps without maceratorTechnical data Wilo-EMU FA 10…Wilo-EMU FA 10…MotorProtection class with maximum submersion depth IP 68 IP 68 IP 68 IP 68 IP 68 IP 68Insulation class F F F F F FSwitching frequency [1/h] 15 15 15 15 15 15PumpSubmersion depth, maximum [m] 12.5 12.5 12.5 12.5 12.5 12.5Fluid temperature [°C] 40 40 40 40 40 40Fluid temperature briefly possible [°C] 60 60 60 60 60 60Density of the fluid, maximum [kg/m 3 ] 1030 1030 1030 1030 1030 1030Cable typeH07 RN-F, roundPower lead-in: NSSHÖU-JControl cable: NSSHÖU-OCable length [m] 10 10 10 10 10 10Cable cross-section 3~400 V [mm 2 ] 10G1.5 10G1.5 10G1.5Type of power cableActivation typeRubber hose linestar/deltaPower lead-in: 2x(4x4)x)Control cable:2x1.5Power leadin:7x2.5Controlcable:2x1.5Oil volume gasket housing [l] 2 2 2 8.6 8.6 8.6Free ball passage [mm] 80 80 80 80 80 80DimensionsPressure port DN 100 100 100 100 100 100Weight [kg] 106 137 139 361 376 415MaterialsPump housing EN-GJL-250 EN-GJL-25 EN-GJL-25 EN-GJS-500-7Impeller EN-GJL-250 EN-GJL-25 EN-GJL-25 EN-GJS-500-7Shaft 1.4021 (AISI 420)Mechanical seal (bidirectional), pump side SiC/SiC SiC/SiC SiC/SiCMechanical seal (bidirectional), motor side – – –.34-234E + T 17-4/16HCartridge: SiC/SiC,Housing: 1.4021 (AISI 420)Cartridge: SiC/SiC,Housing: 1.4021 (AISI 420)Static seals FPM/NBR FPM/NBR FPM/NBR FPM/NBR FPM/NBR FPM/NBRRotary shaft seal, on motor side FPM FPM FPM – – –Motor housing EN-GJL-250 EN-GJL-250 EN-GJL-250 EN-GJL-250 EN-GJL-250 EN-GJL-250.34-258E + T 17.2-4/24H.34-278E + T 17.2-4/24H.78-330Z + T 24-4/29KSubmersible Motor Pumpswith MaceratorSubmersible Motor Pumpswithout MaceratorElectrical AccessoriesWilo-DrainFlag4Flag5.78-370Z + T 24-4/29K.78-410Z + T 24-4/36K• = available or authorised, – = not available or not authorisedWilo Catalogue C2 – 50 Hz – Sewage Pumps DN 32 to DN 600113