C2-Sewage Pumps DN 32 to DN 600 - 2008.pdf

Sewage Pumps for Building ServicesSubmersible motor pumps without maceratorTechnical data Wilo-Drain STS 65/...Wilo Drain ...STS 65/6 STS 65/10 STS 65/14 STS 65/18 STS 65/22Approved fluidsWashing machine soap and water mixture(without long-fibre constituents)• • • • •Water from automobile washing plants • • • • •Bath water, unchlorinated • • • • •Fire-fighting water • • • • •Heating water T max < 40°C T max < 40°C T max < 40°C T max < 40°C T max < 40°CHot water T max < 40°C T max < 40°C T max < 40°C T max < 40°C T max < 40°CBoiler water T max < 40°C T max < 40°C T max < 40°C T max < 40°C T max < 40°CCondensate T max < 40°C T max < 40°C T max < 40°C T max < 40°C T max < 40°CCooling water • • • • •Clean water • • • • •Untreated sewage/water • 1) • 1) • 1) • 1) • 1)Drainage water • • • • •Semi-desalinated water – – – – –Rainwater • • • • •Swimming-pool water – – – – –Sea water – – – – –Wastewater, floodwater and river water • • • • •Domestic sewage and wastewater with faeces • 1) • 1) • 1) • 1) • 1)Non-bubble-forming sludge(up to 10% vol. dry substance)• • • • •Amount of solid matter 3% • • • • •Very diluted alkalis • • • • •Mildly aggressive media • • • • •PerformancePower consumption P 1 1~230 V [kW] 2.3 2.3 – – –Power consumption P 1 3~400 V [kW] 2.3 3.5 4.1 5.5 5.8Nominal motor power P 2 [kW] 1.3 1.5 2.5 3.5 4.0Nominal current with 1~230 V [A] 10.0 10.0 – – –Nominal current with 3~400 V [A] 3.7 5.4 6.5 8.5 9.1Speed [1/min] 2900 2900 2900 2900 2900MotorProtection class with maximum submersion depth IP 68 IP 68 IP 68 IP 68 IP 68Insulation class F F F F F• = available or authorised, – = not available or not authorised, 1) Not within the scope of DIN EN 12050-156 Subject to change without prior notice 09/2007 WILO AG