C2-Sewage Pumps DN 32 to DN 600 - 2008.pdf

Sewage Pumps for Building ServicesSubmersible motor pumps with maceratorSeries description Wilo-Drain MTCConstructionSubmersible sewage pump as submersible monobloc unit withmacerator for vertical wet sump installation; detachable connectioncable.MotorThree-phase current asynchronous motor 3~400 V, 50 Hz or alternatingcurrent motor 1~230 V, 50 Hz (MTC 40). Protection classIP 68, thermal winding contacts, insulation class F.Bearing configurationBearing configuration of the motor shaft in permanently lubricated,low-maintenance roller bearings.Wilo-Drain MTCSubmersible sewage pump with macerator, 2-poleType keyExample: Wilo-Drain MTC 32 F 55.13/66 ExMT Macerator TechnologyC Grey cast iron32 Nominal diameter [mm]F Impeller shape55 Max. delivery head [m].13 Maximum volume flow [m³/h]/66 Power P 2 [kW] = value/10 = 6.6 kWEx Protected against explosions in accordance with ATEXRadial shaft sealing ringThe motor is insulated with 2 mechanical seals. The exception here isthe MTC32 F 39.10, which is sealed on the motor side with 2 radialshaft sealing rings.Scope of deliveryPump ready for connection with 10 m connection cable with barecable end (3~), or with shockproof plug, float switch (1~) and installationand operating instructions. Other cable lengths on request.ApplicationWilo-Drain MTC submersible motor pumps are suitable for pumpingsewage containing faeces and municipal and industrial sewage, evenwith long-fibre constituents for- house and site drainage- sewage and water management- environmental and wastewater treatment technology18 Subject to change without prior notice 09/2007 WILO AG