JDMFG_CATALOG_Full__15I

Replacement Poly Fan Blades
Blade Assemblies
Information needed to order poly fan blade assemblies
• Fan Size (12”,14“,16”,18“,20”, 24”)
• Blade Pitch (25°, 30°, 35°, 40°, 45°)
• Number of wings on hub (3, 4, 6, 8)
• Hub bore size in inches (1/2”, 5/8”)
• Hub size in inches (3-3/4”, 5-1/4”)
Enter the collected information into this formula
VRP+Fan Size+Pitch+# of Wings+Bore+Hub+-P
Filling in this formula with your data will give you the
replacement part number for your poly fan blade assembly.
Example:
You collect this information from your assembly
• Fan Size = 24”
• Blade Pitch = 45°
• Number of wings on hub = 8
• Hub bore size in inches = 5/8”
• Hub size in inches =3-3/4”
Enter the collected information into the formula
VRP+24+45+8+58+334+-P
Replacement Wings
Information needed to order individual poly fan wings
• Fan Size (12”,14“,16”,18“,20”, 24”)
• Blade Pitch (25°, 30°, 35°, 40°, 45°)
• Hub size in inches (3-3/4”, 5-1/4”)
Enter the collected information into this formula
PFPW+Fan Size+Pitch+Hub
Filling in this formula with your data will give you the
replacement part number for your poly fan blade assembly.
Example:
You collect this information from your wing
• Fan Size = 12”
• Blade Pitch = 30°
• Hub size in inches = 3-3/4”
Enter the collected information into the formula
PFPW+12+30+334
Using this example your part number would be:
PFPW1230334
Using this example your part number would be:
VRP2445858334-P
Accessories
_______________________________________________________________
Part# Description
PP10302 Shaft Collar, ½” Motor Shaft Shim to fit ⅝” Bore in Hub
6200 Highway 12, Eau Claire, WI 54701
ph. 800-998-2398 • fax. 888-972-4454
JD11D_1504
ph. 715-834-1439 • fax. 715-834-3812
www.jdmfg.com • e-mail: jdmfg@jdmfg.com