JDMFG_CATALOG_Full__15I

Heavy Duty Industrial Basket Fan
with 2- or 3-Speed High-Efficiency Motors
The J&D Heavy Duty Industrial Fan is an industry leader in air performance. This fan was
designed for the industrial market where performance is mandatory for machine efficiency
and employee comfort. Heavy Duty Industrial Fans are available in black or white,
oscillating or non-oscillating, with a powerful 2- or 3-speed motor.
Features
• Available in 20”, 24” and 30”
• 2- or 3-speed high-efficiency motor with pull chain
• Fan ships completely assembled
• 20” and 24” models with a 1/4 HP motor are available in black or white
• 30” models with a powerful 1/2 HP motor are available in black
• Heavy gauge, corrosion resistant powder coated guards
• Oscillating models with 80° pivot range, or non-oscillating
• Optional wall or post mount brackets
• Quiet operation
• Attached cord with 3-prong plug pre-wired for 115 Volts
• Guards meet OSHA 1910.212(1)(5) requirements
• Totally enclosed, maintenance-free, direct drive high-efficiency
motors have completely sealed ball bearings and are covered by
a Two Year Warranty
• Can be used with our misting/fogging product line
Black Guard White Guard
CCFM
CCFM/Watt
____________________________________________________________________________________________
Part# Part# Size HP Volts Amps HZ Phs Spd Hi/(Med)/Low Hi/(Med)/Low RPM Drive Blade Cord
____________________________________________________________________________________________
VDF20HOB2 VDF20HOW2 20” 1/4 115 4.2 60 1 2 6,800/5,000
18/14 1,075/875 DD 3-Alum 10’
____________________________________________________________________________________________
VDF24HOB2 VDF24HOW2 24” 1/4 115 4.2 60 1 2 6,800/5,000
18/14 1,075/875 DD 3-Alum 10’
____________________________________________________________________________________________
VDF30HOB2 N/A 30” 1/2 115 4.5 60 1 3 9,800/8,850/7,900 20/18/16 1,075/975/875 DD 3-Alum 18’
____________________________________________________________________________________________
Oscillating Models
____________________________________________________________________________________________
VDF201HOB2 VDF201HOW2 20” 1/4 115 4.4 60 1 3 6,800/5,900/5,000 18/16/14 1,075/975/875 DD 3-Alum 16’
____________________________________________________________________________________________
VDF241HOB2 VDF241HOW2 24” 1/4 115 4.4 60 1 3 6,800/5,900/5,000 18/16/14 1,075/975/875 DD 3-Alum 16’
VDF301HOB2 N/A 30” 1/2 115 6.0 60 1 3 9,800/8,850/7,900 20/18/16 1,075/975/875 DD 3-Alum 16’
Mounting brackets NOT INCLUDED. Please select from the recommended brackets below to fit your installation needs.
Mounting Brackets
_____________________________________________________________
Part #
Fan Size Description
Finish
_____________________________________________________________
VRSBR14 12”-36” 42” Extended Bracket, fits Square or Round Post Black Powder Coated
_____________________________________________________________
VRSBR143 12”-36” 42” Extended Bracket, fits 3” Pipe – Bolt On Black Powder Coated
_____________________________________________________________
VRSBR144 12”-36” 42” Extended Bracket, fits 4” Pipe – Bolt On Black Powder Coated
_____________________________________________________________
VRSBR14412 12”-36” 42” Extended Bracket, 4½” Pipe – Bolt On Black Powder Coated
VRSBR901-HDG 12”-36” Wall Mount Bracket
Hot Dip Galvanized
Shown:
Wall mount bracket
VRSBR901-HDG with
oscillating fan
No electrician needed!
Hang it up
Plug it in
MADE IN
U. S. A.
VRSBR14
VRSBR143, VRSBR144, VRSBR14414
Tilt fan left or right, up or down
6200 Highway 12, Eau Claire, WI 54701
ph. 800-998-2398 • fax. 888-972-4454
1016_13K
ph. 715-834-1439 • fax. 715-834-3812
www.jdmfg.com • e-mail: jdmfg@jdmfg.com