JDMFG_CATALOG_Full__15I

Steel Slider Gate
With J&D Manufacturing’s steel
Slider Gate you can now use one
adjustable gate to securely close
two different size openings. Direct
your herd with the swing of a gate
through multiple alleys and lanes.
J&D Slider Gates attach easily to
J&D steel Make-A-Gates or J&D
Custom 5-Bar Steel Gates.
Features
Extend your
Steel Make-A-Gate
by 2’- 6’
• Close two different size openings with one slider gate
• Durable black poly slider bushings for a smooth glide
• 2 prong latch lock to secure the gate during swing
• Includes heavy duty U-bolts to easily attach the Slider Gate to
your standard J&D Make-A-Gate
• May attach to any other 1.9” round tube gate with horizontal
rails at 21” OC
• 5 bar design with 14 gauge 1.9” tubing on top 3 support bars,
and heavy duty 11 gauge 1.9” tubing on bottom 2 support bars
for added strength
• 2-1/4” square tube end supports
• Includes gate chain and welded chain latch
• Requires 2’ of overlap with stationary gate for mounting
• Numerous accessories available including latches, deadbolts,
gate posts, and mounting hardware
______________________________________________________________
Part# Description
______________________________________________________________
MAGSL04 Slider Gate, Steel, 5-Bar, 4’ Wide w/Gate Chain (2’ Extension)
______________________________________________________________
MAGSL05 Slider Gate, Steel, 5-Bar, 5’ Wide w/Gate Chain (3’ Extension)
______________________________________________________________
MAGSL06 Slider Gate, Steel, 5-Bar, 6’ Wide w/Gate Chain (4’ Extension)
______________________________________________________________
MAGSL07 Slider Gate, Steel, 5-Bar, 7’ Wide w/Gate Chain (5’ Extension)
MAGSL08 Slider Gate, Steel, 5-Bar, 8’ Wide w/Gate Chain (6’ Extension)
How to order:
A = Size of largest opening, rounded up to the nearest foot.
Example: IfI
largest opening is 15’ 8”, use 16’ for calculations.
B = Size of smallest opening, rounded up to the nearest foot.
This will be the size of your standard Make-A-Gate
Example: If smallest opening is 9’6”, use 10’ for calculations.
Order the MAGS10.
2‘ = Required overlap
C = Slider Gate size
(A - B) + 2’ = C
Example: (16’ – 10’) + 2’ = 8’
This example system would then require a MAGS10
and a MAGSL08 to form a complete Slider Gate unit.
6200 Highway 12, Eau Claire, WI 54701
ph. 800-998-2398 • fax. 888-972-4454
1902_13I
ph. 715-834-1439 • fax. 715-834-3812
www.jdmfg.com • e-mail: jdmfg@jdmfg.com