JDMFG_CATALOG_Full__15I
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Shade Cloth<br />
D=Top Edge Finishing<br />
F=Side Edge<br />
Finishing<br />
A = Width<br />
B = Length<br />
C=Shade %<br />
E=Bottom Edge Finishing<br />
How to Order:<br />
A = Raw Material Width: 6’, 10’, 12’ or 15’<br />
B = Raw Material Length:<br />
Per foot increment<br />
C = Shade Percentage: 30, 47, 55, 63, 73, 78, 80, 95, 100%<br />
D = Top Edge Finish:<br />
E = Bottom Edge Finish:<br />
Select finish number from box at right<br />
F = Side Edges Finish:<br />
Edge Finishing Options:<br />
1. Standard tape edge with single stitch hem<br />
2. #2 grommet (5/16” hole) with 2‘ spacing<br />
3. #2 grommet (5/16” hole) with 4’ spacing<br />
4. Keder rope (adds 1/2“ to overall width)<br />
5. 3” pocket hem (subtracts 3“ from overall width)<br />
6. 4“ pocket hem (subtracts 4” from overall width)<br />
Standard Tape Edge<br />
Single stitched standard<br />
reinforced tape edge<br />
Grommet Edge<br />
Double stitched extra wide<br />
reinforced tape edge and<br />
#2 grommets (5/16” hole)<br />
Choose 2’ or 4’ grommet spacing<br />
Keder Edge<br />
Double stitched to extra<br />
wide, double stitched<br />
reinforced tape edge<br />
Pocket Hem Edge<br />
Extra wide, double stitched reinforced<br />
tape edge is folded over and double<br />
stitched again to create a pocket hem<br />
Options: 3” Pocket (max pipe OD = 1.029”)<br />
4” Pocket (max pipe OD = 1.660“)<br />
Keder edge slides easily<br />
into J&D’s curtain tack<br />
strip and roll tube for<br />
quick installation<br />
PCSR600<br />
PCSR610<br />
6200 Highway 12, Eau Claire, WI 54701<br />
ph. 800-998-2398 • fax. 888-972-4454<br />
1202b_13H<br />
ph. 715-834-1439 • fax. 715-834-3812<br />
www.jdmfg.com • e-mail: jdmfg@jdmfg.com
Change language