JDMFG_CATALOG_Full__15I
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Pruden Inlet Actuator<br />
J&D Manufacturing’s Pruden Inlet Actuator is designed to work with many types of inlet openings including ceiling and side wall inlets. The<br />
Inlet Actuator has a protective housing with sealed electrical components for maximum performance and long life under the harshest<br />
agricultural conditions. The adjustable mounting brackets and quick-connect plug in sockets make the Pruden Inlet Actuator a snap to<br />
install. Use with the J&D Switching Center for automatic inlet control.<br />
Features<br />
• Designed to work with all types of inlet openings including ceiling, wall, slider or<br />
curtain (verify load capacity)<br />
• All parts protected against the harshest corrosive agricultural elements including<br />
hogs and poultry<br />
• Thermal overload protection<br />
• Potentiometer and electrical components are sealed and protected from water<br />
and humidity<br />
• Quick and easy to connect with plug in sockets<br />
• Keyed shaft to prevent shaft from turning<br />
• 1,000 lbs startup and 800 lbs dynamic load<br />
• 24” stroke with a speed of 10” per minute<br />
• Includes two adjustable mounting brackets<br />
• Can be mounted to ceiling or sidewalls<br />
• One Year Warranty<br />
Manual<br />
Switching Center<br />
with Relay<br />
For maximum control and easy operation, add the<br />
JDSC Switching Center with relay. The JDSC can<br />
be wired for either 115 or 230 volts.<br />
SWITCHING CENTER<br />
WITH RELAY<br />
OFF<br />
AUTO<br />
MANUAL<br />
OFF<br />
CLOSE<br />
OPEN<br />
JD-SC<br />
____________________________________________________________________________<br />
Part # Volts Hz Description<br />
____________________________________________________________________________<br />
Actuators<br />
____________________________________________________________________________<br />
PFACT115-24 115 50/60 Linear Actuator, 24” Stroke Travel, with Mounting Brackets<br />
____________________________________________________________________________<br />
PFACT230-24 230 50/60 Linear Actuator, 24” Stroke Travel, with Mounting Brackets<br />
____________________________________________________________________________<br />
Switching Center<br />
JDSC 115/230 N/A Switching Center with Relay<br />
Contact J&D Manufacturing to determine actuator requirements per number of inlets.<br />
Warning: 115/230 single phase voltage inside.<br />
Disconnect power before opening.<br />
6200 Highway 12, Eau Claire, WI 54701<br />
ph. 800-998-2398 • fax. 888-972-4454<br />
JD12E_1208<br />
ph. 715-834-1439 • fax. 715-834-3812<br />
www.jdmfg.com • e-mail: jdmfg@jdmfg.com
Change language