JDMFG_CATALOG_Full__15I
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Cow Comfort Mat<br />
How to Order Cow Comfort Mat System<br />
A = Number of Stalls/Comfort Mats<br />
B = Number of T-bars<br />
C = Number of L-angles<br />
D = Number of Anchors<br />
Example:<br />
The number of Comfort Mats required<br />
is equal to the number of Stalls<br />
Formula:<br />
A–1 = B<br />
A ÷ 3 = Round Up +1 = C<br />
(B x 4) + (C x 7) = D<br />
Number of Stalls/Comfort Mats: 85<br />
Sealing Lip<br />
L-angle<br />
Hold<br />
Down<br />
The number of T-bars required is 1 less<br />
than the number of Comfort Mats.<br />
Comfort<br />
85 ( ) – 1 = 84 T-bars<br />
Mats<br />
To figure out how many L-angles are<br />
required, divide the number of Comfort<br />
Mats by 3.<br />
Comfort<br />
85 ( ) ÷ 3 = 28.3<br />
Mats<br />
Round that number up to the next<br />
full number.<br />
Then add 1 additional L-angle to<br />
secure the beginning and end sides<br />
of the Comfort Mat installation.<br />
Round<br />
28.3 ( ) = 29<br />
29 +1 = 30 L-angles<br />
To figure out how many Anchors you will need:<br />
Multiply total number of T-bars by 4.<br />
Multiply total number of L-angles by 7.<br />
Add subtotals together for total of<br />
Anchors required.<br />
84 ( T-bars ) x 4 = 336 Anchors<br />
30 ( L-angles) x 7 = _______ 210 Anchors<br />
546 Total number of<br />
anchors required<br />
Up<br />
Sealing Lip<br />
Sealing Lip<br />
T-bar<br />
Hold<br />
Down<br />
The complete order for an 85-stall run would be as follows:<br />
85 Comfort Mats<br />
84 T-bars<br />
30 L-angles<br />
546 Anchors<br />
_____________________________________________<br />
Part# Description<br />
_____________________________________________<br />
SDM4771 Mat, Cow Comfort, 47” x 71”, 30MM Thick<br />
_____________________________________________<br />
Installation Components<br />
_____________________________________________<br />
PP10668 T-bar, 70” Black PVC, Hold Down<br />
_____________________________________________<br />
PP10669 L-angle, 144” Black PVC, Hold Down<br />
HD10574 Anchor, Flat Head Split Drive, ¼” x 4”, Zinc<br />
6200 Highway 12, Eau Claire, WI 54701<br />
ph. 800-998-2398 • fax. 888-972-4454<br />
1604_14H<br />
ph. 715-834-1439 • fax. 715-834-3812<br />
www.jdmfg.com • e-mail: jdmfg@jdmfg.com