JDMFG_CATALOG_Full__15I

Total System Solutions
T8 LED Lighting Retrofit Kits
Before you buy, verify that your current fluorescent lighting fixture is compatible with J&D T8 LED Retrofit Kits.*
T8 & T12 Fluorescent to T8 LED
______________________________________________
Part# Description
______________________________________________
4’ Luminaire
______________________________________________
LEDRK2-4 For 2 Tube 4’ Fixture, T8 or T12 Fluorescent to T8 LED
______________________________________________
LEDRK3-4 For 3 Tube 4’ Fixture, T8 or T12 Fluorescent to T8 LED
______________________________________________
8’ Luminaire
______________________________________________
LEDRK4-8 For 4 Tube 8’ Fixture, T8 or T12 Fluorescent to T8 LED
______________________________________________
LEDRK6-8 For 6 Tube 8’ Fixture, T8 or T12 Fluorescent to T8 LED
______________________________________________
2x4’ Luminaire
______________________________________________
LEDRK4-24 For 4 Tube 2x4’ Fixture, T8 or T12 Fluorescent to T8 LED
LEDRK6-24 For 6 Tube 2x4’ Fixture, T8 or T12 Fluorescent to T8 LED
*For T8 and T12 retrofits, verify that your gear trays
have tombstone opening measurements like the properly
sized tombstone opening shown below in the Universal
Gear Tray illustration.
Installation of T8 & T12 kits require that you retain and use
1 of your existing tombstones/lamp holders per tube.
LEDRK3-4
T5 Fluorescent to T8 LED
______________________________________________
Part# Description
______________________________________________
4’ Luminaire
______________________________________________
LEDRK2-4T5 For 2 Tube 4’ Fixture, T5 Fluorescent to T8 LED
______________________________________________
LEDRK3-4T5 For 3 Tube 4’ Fixture, T5 Fluorescent to T8 LED
______________________________________________
8’ Luminaire
______________________________________________
LEDRK4-8T5 For 4 Tube 8’ Fixture, T5 Fluorescent to T8 LED
______________________________________________
LEDRK6-8T5 For 6 Tube 8’ Fixture, T5 Fluorescent to T8 LED
______________________________________________
2x4’ Luminaire
______________________________________________
LEDRK4-24T5 For 4 Tube 2x4’ Fixture, T5 Fluorescent to T8 LED
LEDRK6-24T5 For 6 Tube 2x4’ Fixture, T5 Fluorescent to T8 LED
*For T5 retrofits, your lighting gear tray MUST be a
Universal Gear Tray. It MUST have tombstone opening/
knockout and spacing measurements that correspond
to the requirements shown below in the Universal Gear
Tray illustration.
LEDRK3-4T5
3/8”
T8 LED Tubes
CCT
____________________________________________
Part# Description Watts (°K) Volts Amp
p_
Hz _
Lumens
____________________________________________
Standard
_ _
____________________________________________
LED-418D Clear Tube 18 5,000 110-277 0.16
50/60 1,800 1800
____________________________________________
LED-418C Frosted Tube 18 4,100 110-277 0.16 50/60 1,800
____________________________________________
Rotatable
____________________________________________
LED-418A Clear Tube 18 6,000 110-277 0.16 50/60 1,800
LED-418B Frosted Tube 18 4,100 110-277 0.16 50/60 1,800
Don’t forget to
order your tubes!
1”
Properly sized
tombstone opening.
Universal Gear Tray
Required distance from inner edge to inner edge of properly sized tombstone opening.
47 1/8”
Due to our continual effort to provide the best products available and adhere to market conditions; literature, products, prices and availability are subject to change without notice.
www.jdmfg.com
jdmfg@jdmfg.com
6200 Hwy 12
Eau Claire, WI 54701
P:1-800-998-2398
F:1-888-972-4454
Page: 2507d-15E