Instruction Sheet - Agentur KONSENS

Suspension from hall roof S2.15
Exhibition Center Nuremberg Return to
Contractor *
29.3.–1.4.2012
NürnbergMesse GmbH
Herrn Lukas Handrich
SAG GmbH
ServicePartnerCenter
Messezentrum
Messezentrum 1
90471 Nürnberg
90471 Nürnberg
Tel +49 (0) 9 11. 81 88 18-0
Fax +49 (0) 9 11. 86 06-12 83 81 Fax +49 (0) 9 11. 81 88 18-19
sag-messe@sag.eu
Company
Street
Postcode, Town, Country
Tel
Fax
E-mail
Order
1. Suspension from hall roof
Attention:
Please mark the suspension points and any special services required
on the enclosed stand plan!
Note:
The vertical loading capacity of suspension points is maximum 25 kg per
point in halls 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 and 12 and maximum 250 kg from
fixed point in halls 4A, 7A and 11.0.
It is essential to state the weight per suspension point!
A higher load on the ceiling construction is possible in exceptional cases
subject to compliance with various criteria. The additional costs are to be
borne by the applicant. The necessary technical plans/documents are to be
submitted to SAG GmbH in digitalized dwg format at least 6 weeks before
the start of assembly.
A discount may be granted on request for 10 or more suspension points
(except in halls 4A, 7A and 11.0), provided the order forms for “Suspension
from hall roof” are submitted in a complete and technically correct state in
good time (at least 6 weeks before the start of assembly).
Mounting your exhibits (flags, trusses etc.) is not included in the
price of suspension points.
Height of suspension point above hall floor _________ m
(Please note the maximum construction height determined by the organizer)
Type of suspension:
(e.g. flags, banners, trusses, lighting)
__________________________________________________________________
We order in accordance with the General Terms of Business and
Technical Guidelines of NürnbergMesse:
Hall 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12 EUR / piece(s)
� 1.1 suspension point consisting of 4 mm steel rope
with open end and power supply rated at 3 kW
from main supply 110.10 _______ piece(s)
� 1.2 suspension point consisting of 4 mm steel rope
with power supply rated at 3 kW from main supply,
including wire rope clamp for hire (info overleaf) 115.30 _______ piece(s)
� 1.3 suspension point without power supply,
otherwise as per Item 1.1 101.20 _______ piece(s)
� 1.4 suspension point without power supply,
otherwise as per Item 1.2 106.35 _______ piece(s)
Halls 4A, 7A and 11
� 1.5 suspension point from pre-rigg or fixed point,
consisting of steel rope up to 10 mm, with open
end, load capacity: max. 250 kg 198.85 _______ piece(s)
� 1.6 suspension point from pre-rigg or fixed point, consisting
of steel rope up to 10 mm including wire rope clamp,
for hire (info overleaf), load capacity: max. 250 kg 219.85 _______ piece(s)
� 1.7 power supply up to 9 kW to suspension point
from main supply (more than 9 kW on request) 82.80 _______ piece(s)
Return deadline
immediately
Person to contact
Tel
Fax
Invoice address (only if different)
VAT ID number of exhibitor:
Place and date Company stamp and authorized signature
Hall/Stand
2. Shading, trusses, hoisting for hire
Shading for light domes EUR / piece(s)
� 2.1 in halls 1, 2, 4, 5, 6, 7, 8 and 9 100.20 _______ piece(s)
� 2.2 in halls 3 and 7A 149.35 _______ piece(s)
� 2.3 installation of exhibitor’s own material
___________________________________________
___________________________________________
___________________________________________
Truss-systems
fixed to a suspension point – see Item 1
including necessary assembly and dismantling
on request
� 2.4 4-point truss (300 x 300 mm) 39.45 _______ m lfdll
� 2.5 shaped parts 300 x 300 mm
(corner pieces, angle pieces etc.) 46.70 _______ piece(s)
other trusses and shaped parts
Hoisting (in halls 4A, 7A and 11)
on request _______ piece
� 2.6 electric chain hoist D8+, 250 kg, lift 17 m,
at existing suspension point (Item 1.3) 210.00 _______ piece(s)
� 2.7 motor controller for chain hoist motor (Item 2.6) 30.00 _____ à channel
� 2.8 manual chain hoist, 500 kg, lift 8 m, at existing
suspension point (Item 1.3), without assembly 55.00 _______ piece(s)
� 2.9 torque motor up to 250 kg with direction
reverse and speed control from 0.8–5 rpm,
including motor controller, at existing
suspension point/system (Item 1.3) 305.00 _______ piece(s)
3. Work according to outlay
(fitter’s hourly rate including all additional charges) EUR/h.
3.1 fitter à / h. 35.00
3.2 fitter with hydraulic work platform à / h. 72.10
4. Lighting
see order form for Accessories for suspension + lighting S2.17
All prices in EURO plus VAT at the statutory rate.
The ordered services have to be paid after receiving the invoices without
delay. Issuing the invoice could take place before start of the event.
* If necessary, NürnbergMesse is entitled to have the service ordered provided by another ServicePartner. In this case, the customer will be notified of the other ServicePartner in
good time.
With our authorized signature below, we acknowledge acceptance of all items of the General and Special Terms of Business of NürnbergMesse and the General Terms of
Business and the Special Conditions for Services of the ServicePartner.
Please turn over!