Operating Manual LUXOR S 400
Operating Manual LUXOR S 400
Operating Manual LUXOR S 400
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>LUXOR</strong> S <strong>400</strong><br />
Every three years<br />
9.5 Maintenance work<br />
9.5.1 Clean the dry air filter<br />
Clean or exchange the dry air filter through the opening in the front panel of the unit.<br />
Maintenance and repair 9<br />
Maintenance work<br />
Component Activity Target value/Meaning Qualification<br />
Adsorption agent (drying<br />
agent cartridges)<br />
� Prepare the dry air generator for maintenance (see “Maintenance and repair“ on Page 46.<br />
� Unscrew the wing nut [1] with the cover [2].<br />
Exchange See Page 54 Specialist<br />
personnel<br />
Temperature sensor Exchange See Page 65 Specialist<br />
personnel<br />
Air pressure monitor for<br />
regeneration air heater<br />
Fig. 9.2 – Remove the filter cartridge<br />
� Unscrew the hexagonal nut [3] and remove the filter cartridge [4] from the housing.<br />
CAUTION!<br />
WARNING!<br />
Exchange Flow monitor, see Page 67 Specialist<br />
personnel<br />
[1] Wing nut<br />
[2] Cover<br />
[3] Hexagonal nut<br />
[4] Filter cartridge<br />
MATERIAL DAMAGE!<br />
On blowing out the dry air filter housing, impurities may be blown into the drying agent.<br />
� Therefore, do not blow out the dry air filter housing with compressed air.<br />
� Vacuum the dry air filter housing.<br />
DANGER TO HEALTH!<br />
Dust is whipped up when the filter cartridge is blown out!<br />
� Wear protective glasses and a dust protection mask.<br />
� Blow out the filter cartridge in an outwards direction using compressed air.<br />
Edition: August 2005 49