Samsung 27" 750 Series HDTV 3D Monitor Combo with Apps - LT27A750ND/ZA - User Manual ver. 1.0 (ENGLISH,16.06 MB)

◀
How to set up using the Plug & Access function
1. Turn on the Samsung wireless router and your TV.
2. Insert a USB memory stick into the USB port in your Samsung wireless router.
Check the router’s LED’s to make sure it is on (Blinking → on).
3. Wait a minute, take the USB memory stick out of the router, and then insert
it into a USB port on your Samsung TV. The memory stick downloads the
connection information.
4. Wait until the connection is automatically established.
N N If Plug & Access does not connect your TV to your AP, a pop-up window
appears on the screen notifying you of the failure. If you want to try using
Plug & Access again, reset the AP, disconnect the Samsung Wireless LAN
adapter and then try again from Step 1. You can also choose one of the
other connection setup methods.
▶
English