EN welding technology
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
MIG/MAG shield gas <strong>welding</strong> equipment<br />
New<br />
SYN-MAG 270/320 – step controlled shield gas <strong>welding</strong> equipment<br />
MIG/MAG all-round machines for trades<br />
Quality<br />
made in<br />
Europe<br />
The state-of-the-art synergie control supports<br />
precise regulation of the wire feed with automatic<br />
wire adjustment, and fast and easy setting of<br />
<strong>welding</strong> parameters.<br />
XXInexpensive, but really good!<br />
XXSuitable for thin to thicker materials (0.8 mm<br />
up to max. approx. 15 mm in steel)<br />
XXUniversally deployable thanks to characteristic<br />
curves for steel, stainless steel, aluminium,<br />
and gas shielded filler wires (FCW = Flux Cored<br />
Wire)<br />
XXPowerful 4-roll feed ensures reliable and<br />
constant wire feeding and a stable arc<br />
XXAlways the right setting with 10 or 21 power<br />
stages<br />
XXWith current and voltage display<br />
XXWith 2-cycle/4-cycle/spot and interval control<br />
XXWith automatic wire feed correction<br />
XXWith temperature-controlled fan<br />
Method<br />
XXMAG<br />
XXMIG<br />
Sheet thicknesses<br />
XXFrom 0.8 mm in steel and stainless steel (MAG)<br />
XXFrom 2 mm in aluminium (MIG)<br />
Base materials<br />
XXConstruction steels<br />
XXNon alloy and low alloy materials<br />
XXCrNi steels ferritic/austenitic<br />
XXAluminium alloys<br />
Typical applications<br />
XXMetalworking, mechanical engineering<br />
XXAgriculture, vehicle workshops<br />
XXMaintenance/repairs<br />
SYN-MAG 270-4<br />
SYN-MAG 320-4<br />
Model New SYN-MAG 270-4 New SYN-MAG 320-4<br />
Article no. 1089270 1089320<br />
Technical Data<br />
Wire Ø steel/special steel 0.8 - 1.2 mm 0.8 - 1.2 mm<br />
Wire Ø aluminium 1.0 - 1.2 mm 1.0 - 1.2 mm<br />
Wire Ø filler wire 1.0 - 1.2 mm 1.0 - 1.2 mm<br />
Wire feed 1.0 - 22 m/min 1.0 - 22 m/min<br />
Adjusting range 30 - 270 A 40 - 320 A<br />
DC at I max. 40°C 35 % 30 %<br />
Welding current at 60% DC 40°C 190 A 230 A<br />
Welding current at 100% DC 40°C 160 A 180 A<br />
Open circuit voltage 16.3 - 33.5 V 14.8 - 37.9 V<br />
Switching stages 10 21<br />
Wire feed rolls/driven 4/4 4/4<br />
Power supply 3 x 400 V 3 x 400 V<br />
Permanent output at 100% DC 5.5 kVA 6.2 kVA<br />
Fuse 16 A 16 A<br />
Mains plug CEE 16 CEE 16<br />
Cos phi power factor 0.96 0.96<br />
Insulation class H H<br />
Cooling type AF AF<br />
Degree of protection IP 23 IP 23<br />
Torch cooling Gas Gas<br />
Gas cylinder max. 20 l 20 l<br />
Weight 77 kg 79 kg<br />
Dimensions (LxWxH), mm 820 x 460 x 715 mm 820 x 460 x 715 mm<br />
Schweißkraft equipment has the S mark and complies with standard <strong>EN</strong> 60 974-1; -10/EMC class A<br />
18<br />
Standard equipment SYN-MAG 270-4:<br />
Torch SMB 25/4m<br />
··<br />
Earth cable 4 m with 35 mm2<br />
··<br />
Pressure regulator (large)<br />
··<br />
Basket spool adapter<br />
Standard equipment SYN-MAG 320-4:<br />
Torch SMB 36/4m<br />
··<br />
Earth cable 4 m with 50 mm2<br />
··<br />
Pressure regulator (large)<br />
··<br />
Basket spool adapter<br />
Torch set<br />
XXPremium accessories are included in the<br />
SYN-MAG 270's/320's scope of supply
Change language