EN welding technology

Model PRO-STICK 170 PRO-STICK 170 DC
Article no. 1083260 1083262
Grinding
Technical Data
Weldable electrode Ø 1.6 - 3.25 mm 1.6 - 3.25 mm
Max. weldable material thickness TIG operation - 5.0 mm
TIG setting range 5 - 170 A 5 - 170 A
Electrode setting range 5 - 150 A 5 - 150 A
Fuse hold setting range 5 - 140 A 5 - 140 A
Duty cycle at I max. 40°C TIG 40 % 40 %
Duty cycle at I max. 40°C electrode 30 % 30 %
Duty cycle at I max. 40°C fuse hold 30 % 30 %
Current at 100% DC 40°C TIG 100 A 100 A
Current at 100% DC 40°C electrode 100 A 100 A
Current at 100% DC 40°C fuse hold 100 A 100 A
Power consumption at I max. TIG 5.1 kVA 5.1 kVA
Power consumption at I max. Electrode 6.3 kVA 6.3 kVA
Power consumption at I max. Fuse hold 6.0 kVA 6.0 kVA
Mains voltage 230 V/50 Hz 230 V/50 Hz
Mains voltage compensation -15/+10 % -15/+10 %
Fuse 16 A 16 A
Power factor 0.7 cos phi 0.7 cos phi
Open circuit voltage 68 V 68 V
Protection class IP 23 IP 23
Insulation class F F
Weight 3.5 kg 3.5 kg
Dimensions (LxWxH) 240 x 105 x 160 mm 240 x 105 x 160 mm
Schweißkraft equipment has the S mark and complies with standard EN 60 974-1; -10/EMC class A
Designation
PRO-STICK 170 SET
Consisting of an electrode inverter, welding workplace equipment
SPA 16: 5m welding cable 16mm² with electrode holder and plug
KS 25, 3m earth cable 16mm² with plug KS 25, with earth clamp
200 A, wire brush, chipping hammer, manual protection shield with
welding visor and lens, welders' gloves in a metal transport case
PRO-STICK 170 DC TIG SET
Consisting of an electrode inverter with gas management,
TIG torch WP 17 KM, welding workplace equipment SPA 16: 5 m welding
cable 16 mm² with electrode holder and plug KS 25, 3 m earth
cable 16 mm² with plug KS 25, with earth clamp 200 A, wire brush,
chipping hammer, manual protection shield with welding visor and
lens, welders' gloves, in a metal transport case
Accessories
Designation
Transport case
rugged design, padded, fixed compartments in interior, perfect for
storing your inverter, incl. welding workplace equipment, TIG torch,
etc., dimensions approx. 590 x 360 x 200 mm
TIG torches
Wear part set
Art. no.
1083261
1083265
Art. no.
1240003
Pressure regulator Argon/CO 2 small 1700054
Pressure regulator Argon/CO 2 large 1700050
Welding workplace equipment SPA 16,
1240400
5 m welding cable 16mm² with electrode holder and plug KS 25,
3 m earth cable 16mm² with plug KS25 and earth clamp
200 A, wire brush, chipping hammer, manual protection shield with
welding visor and lens, welders' gloves
Designation
Art. no.
TIG torch WP 17 V/4 m with gas regulator for PRO-STICK 170 1461745
TIG torch WP 17 KM/4 m for PRO-STICK 170 DC 1461747
SPA 16
PRO-STICK 170
PRO-STICK 170 DC
PRO-STICK 170 SET
PRO-STICK 170 DC SET
Transport case
Small
Large
Electrochemical processing Plasma cutting equipment Electrode inverters
TIG inverters
Multifunctional inverters MIG/MAG
Designation
Wear part set WP 17 V/KM consisting of: 1 x each torch cap
short/long with o-ring, 2 x Teflon seal, 2 x each clamping sleeve
1.0/1.6/2.4 mm, 2 x each clamping sleeve housing 1.0/1.6/2.4
mm; 2 x each gas tip size 4/5/6, 2 x each tungsten electrode red
1.0/1.6/2.4 mm, large sorting box
Art. no.
1463103
Wear part set
83
Welding accessories