EN welding technology

Electrochemical metal processing
Qualität Made
in Germany
CLEANO 2 – stainless steel cleaning,
polishing and marking device (dark)
SChweißKRAFT CLEANO 2 - the AC/DC generator for electrochemical
processing of stainless steel and steel (dark marking).
State-of-the-art technology and a fascinating method enable a totally
new approach to cleaning TIG welds. (Not suitable for cleaning MIG-
MAG welds.)
Puts an end to the drawbacks of mechanical or chemical processing.
Easily usable on site, inexpensive and easy on
humans, the environment and the product.
...Cleaning
...Electrical polishing
...Dark marking
The oxide layer is easily removed
without leaving tide marks. At the
same time, the location is passivated
(protected against corrosion), thus
avoiding another step downstream.
Compared with cleaning and pickling
with acis, the approach is far less
expensive. The chemicals used here
do not contain any hazardous materials
and are not subject to mandatory
labelling. Scope of supply CLEANO 2
1231125SK - CLEANO 2 incl. starter kit:
Grey edges (heat affected zones) next
to the weld, cause by material changes
during welding, are easily removed.
Stainless steel can be polished to a
high gloss finish with this approach.
Even achieves a uniform finish on 3-D
mirror material.
The effect of an electrolyte in combination
with a template manufactured to
your design means that you can mark
graphics, trademarks, type plates,
device numbers, scales, lettering and
logos, even on cylindrical components;
with permanently deep black marking.
The electrolyte is PH neutral and does
not need to be neutralised.
1231028ST - Polishing stamp
1231125KS - Cable black, 2 m
1231125KR - Cable red, 2 m
1231206SF - Cleaning and marking pads 20 pcs. in a bag
1232500WB - Wide-necked container, 500 ml
1232310DH - Electrolyte A for cleaning, 1 litre
1232020DC - Electrolyte C for polishing, 500 ml
1232101ET - Electrolyte ET for dark marking, 100 ml
1231216PF - Polishing pads 20 pcs. in a bag
1231126KL - Crocodile clip red
Cleaning/electro-polishing/marking
Model CLEANO 2
Art. no.
1231125 SK
Technical Data
Primary voltage
Secondary voltage
Output
Weight
Dimensions (W x H x D)
*without cable connection
92
230 V, 50 - 60 Hz
24 V, 12 A, 50 Hz
320 W
8.5 kg
150 x 290 x 300* mm
Similar to fig.