EN welding technology
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Inverters TIG <strong>welding</strong> devices digital<br />
Qualität Made<br />
in Germany<br />
PRO-TIG AC/DC – next generation TIG <strong>welding</strong> system.<br />
350 Amperes at 100% duty cycle – liquid-cooling integrated.<br />
The PRO-TIG AC/DC combined premium <strong>welding</strong><br />
equipment <strong>technology</strong> with best-in-class<br />
user-friendliness. The unique combination<br />
of the Dual-Power inverter with the precise,<br />
digital <strong>welding</strong> process control offers perfect<br />
<strong>welding</strong> properties. Includes integrated torch<br />
liquid cooling as a factory standard.<br />
100% duty cycle for all devices<br />
Maximum user-friendliness thanks to easy and<br />
safe handling<br />
XXClear-cut self-explanatory handling: easy and<br />
fast operation of the PRO-TIG is no problem,<br />
even when wearing gloves!<br />
Perfectly stable arc<br />
XXFast and precise <strong>welding</strong> process control: the<br />
arc is kept stable in any position. Innovative<br />
ignition management guarantees reliable<br />
ignition.<br />
High frequency pulse up to 3000 Hz<br />
XXHigh-frequency pulse operation in a<br />
frequency range above 2000 Hz ensures<br />
a precise, focused arc with a high output<br />
density. This ensures reliable and uniform<br />
penetration while at the same time reducing<br />
the heat impact zone. The higher arc<br />
pressure naturally supports faster <strong>welding</strong><br />
speeds. The virtually unavoidable gap<br />
fluctuations between the torch and the weld<br />
pool in manual <strong>welding</strong> thus have virtually no<br />
influence on the <strong>welding</strong> results.<br />
Intelligent ignition management<br />
XXThanks to advanced processor control, the<br />
optimum ignition energy setting is chosen as<br />
a function of the selected <strong>welding</strong> current for<br />
both HF and Lift-Arc ignition. This quickly and<br />
easily produces a stable arc - independently<br />
of the tungsten electrode you are using - and<br />
is gentle on both the workpiece and the<br />
electrode.<br />
TIG AC <strong>welding</strong><br />
XXThe AC arc remains smooth and stable even<br />
with critical and highly oxidised material<br />
surfaces. The quiet and appealing arc noise,<br />
is well below the legally required limit.<br />
Dual Wave Aluminium <strong>welding</strong> method<br />
XXThis custom mode is a combination of AC<br />
and DC <strong>welding</strong>. While <strong>welding</strong> the processor<br />
control automatically switches between<br />
0.2 seconds of DC and then 0.3 seconds of<br />
AC <strong>welding</strong> current. The selected values for<br />
<strong>welding</strong> current I1 or I2, the frequency and<br />
balance are taken into consideration, just<br />
like in DC- or AC-only <strong>welding</strong>. The Dual-Wave<br />
method means improved manageability<br />
of the weld pool and is used for <strong>welding</strong><br />
difficult workpieces (out-of-position<br />
<strong>welding</strong>), when <strong>welding</strong> workpieces of<br />
different thicknesses and when processing<br />
thin sheet aluminium and aluminium alloys.<br />
AC Balance control<br />
XXAC Balance control controls the heat in the<br />
tungsten electrode. The arc can be focused<br />
based on the heat input, e.g., in <strong>welding</strong> thin<br />
sheets or for welded-on edges. Reducing<br />
the heat input also reduces the wear on the<br />
electrode.<br />
Automatic frequency control<br />
XXThe frequency is automatically adapted to<br />
match the current level in AC <strong>welding</strong>. The<br />
AC arc is focused at low <strong>welding</strong> currents.<br />
This ensures reliable root coverage, e.g.,<br />
for fillet welds on thin sheets. The wear on<br />
the tungsten electrode is reduced at higher<br />
currents. The results are a long service<br />
life, and best-in-class economic efficiency.<br />
Automatic frequency control offers benefits,<br />
especially if you work with a remote control<br />
foot pedal. Additionally, the AC frequency<br />
can be manually configured in the range of<br />
30 - 300 Hz.<br />
Generator capability<br />
XXMore flexibility in mobile applications<br />
ELSA.PRO system<br />
XXThe proven ELSA (Electronic Stabilized Arc)<br />
<strong>technology</strong> was enhanced for PRO-TIG. this<br />
highly dynamic digital <strong>welding</strong> process,<br />
with its unique precision and precise<br />
reproducibility, ensures excellent <strong>welding</strong><br />
properties even for melt pools with large<br />
surfaces.<br />
Electrode <strong>welding</strong><br />
XXThe PRO-TIG is also a full-fledged electrode<br />
<strong>welding</strong> device. In addition to the <strong>welding</strong><br />
current, hot start and arc force are freely<br />
configurable. The electrode polarity is<br />
selectable on the device (no need to unplug<br />
and plug the <strong>welding</strong> and workpiece cables).<br />
Of course, the PRO-TIG has the tried and<br />
trusted anti-stick function which prevents<br />
the stick electrode sticking and burning out.<br />
Optimised energy efficiency<br />
XXThe Dual-Power inverter has a uniquely<br />
effective mode of operation. Thanks<br />
to intelligent energy management, in<br />
combination with the use of innovative<br />
components, almost all of the supplied<br />
power is converted into an arc. As energy<br />
costs continue to rise, the PRO-TIG also<br />
contributes to your economic success in<br />
terms of energy consumption.<br />
Method<br />
XXTIG<br />
XXElectrode <strong>welding</strong><br />
XXRemotely controllable/programmable<br />
Sheet thicknesses<br />
XXfrom 0.3 mm<br />
Base materials<br />
XXNon alloy and low alloy materials<br />
XXHigh alloy materials<br />
XXStainless steels<br />
XXConstruction steels<br />
XXCrNi steels ferritic/austenitic<br />
XXDuplex steels<br />
XXAluminium<br />
XXNickel-based materials<br />
XXMagnesium materials<br />
XXCopper materials<br />
XXSpecial materials<br />
Typical applications<br />
XXPlant, container, machine, steel<br />
construction<br />
XXChemical plant construction<br />
XXAutomobile industry and automotive<br />
supplies<br />
XXPlant and pipeline construction<br />
XXConstruction site and mobile use<br />
··<br />
200 kHz Dual-Power inverter<br />
up to 350 A at<br />
100% duty cycle<br />
Plug&Play<br />
XXPRO-TIG works with a smart CAN networked<br />
multiprocessor architecture. All components<br />
are automatically detected and configured by<br />
the PRO-TIG. For the user this means: Plug &<br />
Play – just plug in and start!<br />
Integrated torch liquid-cooling<br />
XXTorch cooling with a cooling performance of<br />
1500 W it is also activated by plug and play.<br />
Percent of fugal pump is requirements-driven<br />
(Auto/On/Off). Once the torch's schooling is<br />
sufficient, the liquid cooling system switches<br />
to standby (torch temperature monitoring).<br />
This reduces energy consumption and noise<br />
emission. A flow monitor is also integrated.<br />
66<br />
Integrated 1500 W liquid cooling device with temperature monitoring, standby function, and plug and<br />
play for optimum communication between the cooling device and the PRO-TIG AC/DC.