Charting and Studies User Guide - CQG.com

To use global cursors
Page 121
This option, typically used with charts of the same contract with different chart intervals, links
the horizontal cursors (lines) on two or more charts, so that moving the cursor on one chart,
moves the cursor to the same time on the other chart(s). In this image, there are four EP
charts at different intervals with a global cursor at 6:30.
1. With more than one chart open, right-click the time scale of a chart.
2. Click Global Cursors. The menu item is checked, and cursors are shown on the
charts.
3. Notice that as you move the cursor on the first chart, the cursor on the linked
chart(s) moves also.
4. To park all of the cursors, hold down the CTRL key and click.
Charting and Studies User Guide