Charting and Studies User Guide - CQG.com

To display the angle of the trend line as you draw it:
1. Draw a trend line.
2. Right-click the line, and then click Modify Trend.
3. Click the Display field for the second point.
Page 195
4. In the Angle field, choose left or right, which indicates that the angle is displayed to
the left or right of the trend line.
5. Click Set as Defaults.
6. Click OK.
Now, each time you draw a trend line, the angle is displayed, making it easy to draw the line at
the angle you want.
If you would rather specify the angle, go to parameters and change the Use field selection to
Angle and enter a value in the Angle field.
The image shows a trend line drawn at a 45-degree angle.
Charting and Studies User Guide