Charting and Studies User Guide - CQG.com

CciDiv Parameters
Name Default Definition
Page 535
N 1 The number of divergence patterns that are needed to produce
a signal. Most only need 1 and will not produce signals if
increased.
Period 5 Qualifies a propriety area within which signals do not have to be
symmetrical.
MA Period 1 This second period refers to the variable of the moving average.
Setting it to a number beyond 1 means that the average is
being used as the divergence tool and not the original indicator.
CCI Period 100 The Cci variable to be used in the divergence calculation
providing the Period of the Ma is set at 1.
Lookback Period 25 Qualifies the lookback period for when divergence can occur
within. Increasing the number will normally increase the number
of divergence signals and for slow moving indicators should be
raised from the default.
MA Type Sim Qualifies the type of moving average to be used.
CciDivDn High Qualifies the relationship within the change in direction of the
indicator and the subsequent bar value to be recorded at that
point.
CciDivUp Low Qualifies the relationship within the change in direction of the
indicator and the subsequent bar value to be recorded at that
point.
Display Parameters
Charting and Studies User Guide