Charting and Studies User Guide - CQG.com

TrxDiv Parameters
Name Default Definition
Page 553
N 1 Number of divergence patterns that are needed to produce a signal.
Most only need 1 and will not produce signals if increased.
Period 5 Qualifies a propriety area within which signals do not have to be
symmetrical.
MA Period 1 This second period refers to the variable of the moving average and
therefore what is normally regarded as the Stochastic %d value .
Setting it to a number beyond 1 means that the average is being used
as the divergence tool and not the original indicator.
Trix Period 14 Period of Trix.
Lookback 100 Qualifies the lookback period for when divergence can occur within.
Increasing the number will normally increase the number of
divergence signals and for slow moving indicators should be raised
from the default.
MA Type Sim Qualifies the type of moving average to be used.
TrxDivDn High Qualifies the relationship within the change in direction of the
indicator and the subsequent bar value to be recorded at that point.
TrxDivUp Low Qualifies the relationship within the change in direction of the
indicator and the subsequent bar value to be recorded at that point.
Display Parameters
Charting and Studies User Guide