Charting and Studies User Guide - CQG.com

Parameters
Page 183
• PFork 1 Value: Determines the first value selected for the PitchFork. Enter a value or
choose to attach to the Open, High, Low, or Close.
• PFork 2 Value: Determines the second value selected for the Pitchfork and is the
location of the system defaulted scale line of 1.000.
• PFork 3 Value: Determines the location of the system defaulted scale line of -1.000
followed by the positioning of the other defaulted PitchFork lines.
• Date: Defines the date of the reference bar. This parameter is only displayed after the
initial pitchfork is displayed. It is not displayed if you select Pitchfork from the Add Study
dialog.
• Time: Defines the time of day for the reference bar. This applies to intraday use. It is
not displayed if you select Pitchfork from the Add Study dialog.
• Display
• Direction: Determines whether the pitchfork points forward (toward the right) or
backward (toward the left) on the chart.
• Id: Turns on and off the labels for the PitchFork lines, and sets the position of the labels,
if they are displayed, either to the right or left of the point marked by the labels.
• IdWt: Sets the boldness of the trend line ID labels. Choices include:
Normal or Bold.
Charting and Studies User Guide