2017-2018-Mercer-Marine-Catalogue

Seating & Accessories
COMMERCIAL HELMSMAN SEAT
Large molded seamless cushions. Heavy “Welded”
aluminum frame. Seat: 18 1/4” x 16” x 6”. Back:18 1/4” x
10 1/2” x 5”. Molded back and arms with waterproof
foam padding. Tough “Anodized” aluminum extrusions
are used in back and front arm supports.
25 1/4”W x 19.5”D x 20”H.
24-000P ..........................Black..........................725.15
CITATION HIGH BACK “PREMIUM” FOLD DOWN SEAT
Beautiful Two-color Upscale 30oz. Marine grade vinyl with UV inhibitor, superior abrasion resistance and finish to
resist dirt and grime. Dual Durometer High Density Foam - longer lasting comfort. Contour styling for greater thigh
and back support. Dimensions: 17” W x 17” D x 24” H.
24-103P ....................................................................White/Grey ........................................................................286.70
24-104P....................................................................Offshore Blue ......................................................................286.70
24-106P ......................................................................Grey/Grey..........................................................................286.70
MULTI PURPOSE HELMSMAN SEAT
A versatile seat with arm chair comfort. Features sewn
cushions and mildew resistant marine vinyl material
with attractive design. Sewn with dacron thread.
Durable 1” aluminum frame and matching padded arm
rests.
24”W x 19”D x 17.5”H.
24-003P ...........................Blue ..........................328.40
24-111P..........................White .........................328.40
ROTATIONAL MOLDED SEAT
Constucted of tough UV resistant polyethylene.White
snap on removable cushions. If seat slide is required,
order #24-095.
24-039P.............................................................377.50
CONTOUR CAPTAINS CHAIR
Rotationally molded polyethylene construction. Deep
bucket seat styling. Ideal for runabouts. New modern
appearance. 23 1/2”W x 22.5”D x 19”H.
Requires additional installation hardware. See info guide
below.
24-089P.................White / Grey Trim ................599.85
INFORMATION GUIDE
Optional installation requirements for 24-089 &
24-064 seats
A seat slide or reinforcement bracket MUST be
mounted directly to the bottom of these seats.
Your options are listed below.
GARELICK SIDE-GUNWALE SEAT
Provides extra seating in the cockpit. Mounts on either
starboard or port side. Comes with Shur Loc catches
which provide permanent or temporary mounting. Firm
2.5" thick resilient foam. Marine grade white vinyl
covered seat 18" x 16". Anodized aluminum tube frame.
Hypalon cushioned support leg. Folds flat, maximum
height 24"
24-098P.............................................................376.65
COMPACT ROTO MOULDED SEAT
Moulded seat. Constructed of exceptionally strong UV
resistant white polyethylene. Front waterfall edges and
natural drain center eliminates water build up.
Removable blue marine vinyl snap-on cushion. See info
guide to the right for required installation hardware.
24-064P.............................................................199.00
116 Contact us at 709-466-7430 or visit us online at www.mercersmarine.com
360 O Swivel mount (Non-sliding)
Use 24-093 reinforcement bracket. This bracket
must be attached directly to the bottom of the
seat. The spider is mounted directly to the bracket
allowing 360 O swivel and attachment.
Fore and aft mount
Use 24-095 seat slide. This slide must be attached
directly to the bottom of the seat. The spider is
mounted to the seat slide, eliminating the need of
purchasing the reinforcement bracket, 24-093.
See page 120 for swivels, slides and brackets.