2017-2018-Mercer-Marine-Catalogue

FRONT MOUNT
SEASTAR FRONT MOUNT“OUTBOARD” CYLINDERS
Single and multiple non-power-assisted outboard
engine applications up to 350 hp for singles (700 hp
for counter-rotating twins). Patented “Pivot” design
allows independent engine tilt in dual engine
installations. Suitable for speeds up to 60 mph and
dual station use.
42-321K ........................HC5345........................785.00
42-452K ........................HC5347........................855.00
42-461K ........................HC5348........................855.00
42-471K ........................HC5358........................799.00
SEAL KIT
42-458P ........................HS5167........................139.00
SIDE MOUNT
STERNDRIVE
SEASTAR SIDE MOUNT“OUTBOARD” CYLINDERS
Unbalanced cylinder with 4.8/5.7 turns lock to lock.
Suitable for installation in shallow splashwells.
Single and dual non-power assisted outboard
engines up to 300hp that have standard engine tilt
tube.Suitable for speeds up to 60 mph and dual
station use.
42-027K ........................HC5370........................589.00
SEAL KIT
42-258P ........................HS5153..........................67.95
INBOARD
SEASTAR INBOARD CYLINDERS
Anodized aluminum construction. Suitable for single
or dual engine applications. O-ring ports with
bleeder fitting.
42-015K ........................HC5314........................640.00
SEAL KIT
42-312P ........................HS5156..........................51.95
SEASTAR STERNDRIVE CYLINDERS
Fits most power and non-power assist sterndrives.
Single and multiple drives. Easy installation.
Simple autopilot interface. Simple multiple steering
connection.
Steering,Controls & Cables
42-332K ........................HC5328........................581.90
SEAL KIT
42-333P ........................HS5154..........................50.95
SEASTAR NYLON TUBING
Non-corrosive tubing designed for use on SeaStar I
Steering Systems. Fits hardware supplied with SeaStar I
cylinders. Not suitable for use with SeaStar II Systems.
42-030K ....................3/8” x 50’ coil ...................124.95
BAYSTAR HYDRAULIC FRONT MOUNT CYLINDER
Compact, front mount, balanced cylinder for use with
the Baystar helm pump on single outboard installations
up to 150HP. Fits most splashwells 32”’ or more in
width. Complete with bleeder tees installed in both
ports.
42-622K ...................... HC-4645H .....................505.00
Adaptor Plate
COPPER TUBING
This soft copper tubing is heavy walled refrigeration
type. The only one that should be used.
42-036M ......................3/8” x 50’ ........................79.95
ENGINE TIE BARS
For installation of two O/B motors, a tie bar and adaptor plate kit are normally required.Contact us with your engine
type, horsepower and model year.
Engine Tie Bar Kits
42-341K .......................HO-6001 .......................535.00
42-342K .......................HO-6002 .......................568.00
42-344K .......................HO-6003 .......................542.00
Prices are subject to change. Check our website for up to date prices. www.mercersmarine.com 67
Tie Bar
Universal Tie Bars
(No Adaptor Plates)
42-304K .......................HO-5009 .......................340.00