2017-2018-Mercer-Marine-Catalogue

“CHARGE PRO” BATTERY CHARGERS
“Charge Pro” offers state-of-the-art technology. These
units out perform many of the other chargers with a
much higher rating.
Electrical
CENTAUR CHARGERS
Three isolated outputs simultaneously charge three battery banks at the full rated current. Provides three stage
charging with internal temperature compensation. All models will operate without any adjustment over a universal
90–265 VAC, 45–65 Hz input voltage range. Aluminum epoxy powder coated cases with drip shields and stainless steel
fittings withstand the rigors of heat, humidity and salt air. Circuit boards are protected with an acrylic coating for
maximum corrosion resistance. A dip switch selects the optimum charge/float voltages for flooded lead-acid, gel or
AGM batteries.
Model 12/20
12 VDC, 20 Amp continuous output. Recommended for
batteries from 80 to 200 Ah capacity.
Dimensions: 14”H x 8.5”W x 4.3”D
28-1050A...........................................................472.00
Model 24/30
24 VDC, 30 Amp continuous output. Recommended for
batteries from 120 to 300 Ah capacity.
Dimensions: 16.8”H x 9.4”W x 5.3”D
28-1056A...........................................................922.00
Model 2632A
Total Amps: 30. Number of Outputs: 2. Amps per output:
20/5/5. Battery System: 3-12V. Output Voltage: 12VDC
per output. Input Voltage: 100-130VAC/50-60Hz. DC
Output: Studs with circuit breakers. Input Connection:
Studs for Hardwire. Weight: 15.6 Lbs.
Dimensions: 12.96” x 9.84” x 2.92”
28-319M....................12V, 30 Amp ....................611.00
Model 12/30
12 VDC, 30 Amp continuous output. Recommended for
batteries from 120 to 300 Ah capacity.
Dimensions: 14”H x 8.5”W x 4.3”D
28-1051A...........................................................540.00
Model 12/40
12 VDC, 40 Amp continuous output. Recommended for
batteries from 160 to 400 Ah capacity.
Dimensions: 16.8”H x 9.4”W x 5.3”D
28-1052A...........................................................667.00
Model 12/60
12 VDC, 60 Amp continuous output. Recommended for
batteries from 240 to 600 Ah capacity.
Dimensions: 16.8”H x 9.4”W x 5.9”D
28-1053A...........................................................760.00
Model 12/80
12 VDC, 80 Amp continuous output. Recommended for
batteries from 320 to 800 Ah capacity.
Dimensions: 19.9”H x 10”W x 5.2”D
28-1054A ........................................................1245.00
Model 12/100
12 VDC, 100 Amp continuous output. Recommended for
batteries from 400 to 1000 Ah capacity.
Dimensions: 19.9”H x 10”W x 5.2”D
28-1055A ........................................................1599.00
Model 24/40
24 VDC, 40 Amp continuous output. Recommended for
batteries from 160 to 400 Ah capacity.
Dimensions: 19.9”H x 10”W x 5.2”D
28-1057A ........................................................1205.00
Model 24/60
24 VDC, 60 Amp continuous output. Recommended for
batteries from 240 to 600 Ah capacity.
Dimensions: 19.9”H x 10”W x 5.2”D
28-1058A ........................................................1375.00
Model 28220 (Formally 2620A)
A high performance charger for 12V or 24V systems.
Supplies 20 amps from 2 individual 10A circuits. For
independent charging of 2 battery banks.
Approx Dimensions : 9 3/4’”W x 7”H X 3 1/8”D
28-320M ................12/24V (20 Amp) ................335.00
Prices are subject to change. Check our website for up to date prices. www.mercersmarine.com
159