2017-2018-Mercer-Marine-Catalogue

Electrical
WEATHERDECK FUSE PANELS
Designed for flybridge and open cockpit applications.
Independent label backlighting circuit for remote
switching and dimming. Constructed of corrosion
resistent materials and weather resistant face plate.
Each panel can be mounted in four different
orientations. Integrated ATO/ATC fuse based circuit
protection.
28-513R ........4 Pos. #4304 (3.875” x 4.3” )........119.00
28-514R ..........6 Pos. #4306 (3.875” x 6” )..........166.95
28-515R ........8 Pos. #4308 (3.875” x 7.7”) ........234.75
WEATHERDECK CIRCUIT BREAKER PANELS
Designed for flybridge and open cockpit applications.
Independent label backlighting allows switching and
dimming. Constructed of corrosion resistent materials
and weather resistant face plate. Compatible with all
Blue Sea Systems Digital Dimmers. Each panel can be
mounted in four different orientations. Push button
thermal trip, manual reset, 15 amp breakers.
28-510R..........4 Pos. #4374 (4.25” x 4.3” ) .........142.50
28-511R ...........6 Pos. #4376 (4.25” x 6”)...........176.50
28-512R ..........8 Pos, #4378 (4.25” x 7.7”) .........246.50
WATERPROOF SWITCH PANELS
Especially designed for flybridge or open cockpit
applications. Heavy 1/8” aluminum face plate with two
part polyurethane slate finish. Waterproof Contura
switches with “ON” indicating LEDs embedded in switch.
Supplied with waterproof mounting gaskets and set of
30 DC labels (not backlightable). Accepts AGC fuses up to
20 amps.
6 Circuit Vertical Model
28-467R ............#8053 (5 1/4” x 7 1/4”)............215.00
8 Circuit Horizontal Model
28-468R ............#8261 (9 3/8” x 3 3/4”)............278.00
Replacement Fuse Holder
28-469R ........................20 Amp............................4.05
12V DC SOCKET AND DUAL USB CHARGER
This panel has 1 12V socket that can supply up to 15
Amps and 1 dual USB socket that can supply up to 2.1
amps. Great for charging cell phones, tablets, and other
electronic devices. Can integrate into Blue Sea 360 Panel
Systems. 4.75” H x 4.88” W x 1.50” D.
28-1306P ...................Model 1478.......................83.50
FUSE BLOCK SYSTEM
Polycarbonate base with clear cover. Cover insulates all
conductive parts, satisfying ABYC / USCG requirements.
Label slots are recessed and accept standard Blue Sea
labels on page 153. Tin-plated, copper buses and
beryllium copper fuse clips give full 30 amp rating per
circuit. Maximum amperage for the total fuse block is
100 amps. Maximum voltage is 32VDC.
6 circuits. 3 1/4”W x 5”H x 1 1/4”D.
28-488R..........Model 5015 (with ground) ...........53.25
28-489R ..........Model 5018 (w/o ground)............45.25
ATC FUSE BLOCK
Clear insulating cover with label recesses accept Small
Format Labels. Cover Satisfies ABYC/USCG requirements
for insulation. Tin-plated copper buses and fuse clips
give 30 Amperes rating per circuit. Accepts ATO and ATC
fast acting blade fuses. 20 write-on circuit labels
included. Tin-plated copper buses and fuse clips give 30
Amperes rating per circuit. Accepts ATO and ATC fast
acting blade fuses.
28-534R..............Model 5025 , 6 Circuit ...............55.95
28-535R.............Model 5026 , 12 Circuit ..............69.95
DUAL USB CHARGER SOCKET
Easy to install in existing 12V DC socket hole providing
convenient access for charging mobile devices.
Compatible with popular mobile devices. Protective Cap.
Maximum output current : 2.1Amp.
Output voltage : 5V DC +/-5%.
Parasitic Current Draw : 15mA
28-1308P ..........12V Only (Model 1016) ..............28.95
28-1309P............12/24V (Model 1018) ...............34.95
DUAL USB CHARGER - SOCKET MOUNT
Charges at the speed required by specific devices.
Internal filtering for reduced electronic interference.
Over temperature protection. Protective dust cap keeps
debris and moisture out. Conformal coated circuit board
for the harsh marine environment.Mounts in a common
1-1/8" hole.
28-1307P............12/24V (Model 1045) ...............53.95
154 Contact us at 709-466-7430 or visit us online at www.mercersmarine.com