2017-2018-Mercer-Marine-Catalogue

BLUE SEA CIRCUIT BREAKER PANELS & ACCESSORIES
BLUE SEA Circuit breaker panels are designed and manufactured to ABYC standards and assure quality construction at an affordable price.
The panel face is 1/8” aluminum which is immersion undercoated for corrosion resistance then finished with a slate color two-part
polyurethane. Panels are supplied with magnetic circuit breakers and each circuit is equipped with an “ON” indicator LED. (amber for DC circuits and green for AC
circuits). Bus bars are tin-plated for corrosion resistance and rated to 100 amps. Panels have heavy #10 stud terminals for wire connections. Each panel comes with a
kit of flush-fitting, self adhesive “Lexan® labels” that are backlightable with optional “BACKLIGHT SYSTEM”.
Electrical
13 CIRCUIT DC PANEL
Comes with an 8-16 DC voltmeter with 3-position
switch to monitor up to 3 battery banks and a 0 to 50
amp DC ammeter with remote shunt. Includes 10, 15
amp breakers and 3 blanks. Ready for installation of
optional model 8065 backlight system (two required)
30 labels included. 10 1/2”W x 7 1/2”H.
28-478M ..............Model 8068, 12 VDC ..............682.00
24 CIRCUIT AC/DC PANEL
This panel is designed for boats with both AC and DC
electrical systems.
The “AC” part of the panel has 8 circuit breaker positions
with reverse polarity indicating red LEDs and a 0-150
volt AC voltmeter. 1, 30 amp double pole AC main
breaker and 3, 15 amp breakers are provided. There are
3 AC blank positions available.
The “DC” side of the panel has 16 circuit breaker
positions. 10, 15 amp breakers are provided along with
6 blank positions. 8 to 16 volt DC voltmeter with a 3-
position switch to monitor up to 3 battery banks and a
0 to 50 amp ammeter are included. Accepts optional
backlight system model 8065 (3 required). Comes with
30 AC labels and 30 DC labels. 14 3/4”W x 10”H.
Model 8084
28-474M................ 12 VDC / 120 VAC ..............1078.00
13 CIRCUIT AC PANEL
Comes with a reverse polarity indicating red LEDs, 0 to
150 AC voltmeter and a 0 to 50 AC ammeter with
remote sensing coil. Supplied with 1, 30 amp (double
main) breaker, 8, 15 amp breakers and 3 blank
positions. Pre wired and ready to accept model 8065
backlight system (2 required). Comes with 30 AC labels.
10 1/2”W x 7 1/2”H.
Model 8076
28-472M....................... 120 VAC .......................690.00
10 CIRCUIT DC PANEL
Same specs. as the 13 circuit panel above only supplied
with 7, 15 amp breakers and 3 blanks. If installing
optional “BACKLIGHT SYSTEM, only 1 model 8065 is
required. 30 labels included. 5 1/4”W x 11 1/4”H.
28-477M ..............Model 8082, 12 VDC ..............536.00
BACKLIGHT LABEL SYSTEM
No more trying to find the correct breaker in the dark!
Simply install the backlight board between 2 bus blocks
and the back of the panel. Model 8065 fits panels with 8
label positions and can easily be shortened to fit 5 or 3
positions. Model 8069 fits panels with 10 positions. The
board connects to the 12 volt VDC supply with 2, #6, 18
AWG wire leads. Each backlight systems draws only 5
milliamps.
28-481R ...............Model 8065, 12 VDC ................25.25
28-482R ...............Model 8069, 12 VDC ................26.95
8 CIRCUIT AC PANEL
Comes with a reverse polarity indicating LEDs. Supplied
with 1, 30 amp (double main) breaker, 3, 15 amp
breakers and 3 blank positions. Accepts model 8065
backlight system. Comes with 30 AC labels. 5 1/4”W x 7
1/2”H.
28-470M .............Model 8027, 120 VAC..............278.00
8 CIRCUIT DC PANEL
All buses installed and fully pre-wired. Comes with 5, 15
amp breakers and 3 blanks. Accepts optional backlight
system model 8065. 30 labels supplied. 5 1/4”W x 7
1/2”H.
28-476M ..............Model 8023, 12 VDC ..............270.00
PANEL LABELS
Blue sea system label set contains 30 of the most
commonly used labels. Tough weather-proof lexan
material. Backlightable, with backlight label system.
28-485R.................DC label kit 8030 .................11.95
28-486R .................AC label kit 8031...................11.95
BREAKER PANEL BACK COVERS
Lightweight and easily installed cover provides
insulation and mechanical protection for exposed panel
backs. Black ABS material is easily drilled for wire
entrances and exits.
Model 4027
28-483R .................(5 1/4” x 7 1/2”) ...................36.95
Model 4028
28-484R ................ (7 1/2” x 10 1/2”)..................97.95
Prices are subject to change. Check our website for up to date prices. www.mercersmarine.com
153