2017-2018-Mercer-Marine-Catalogue

Galvanized Floating Dock Hardware
• 1/4” thick • 9/16” square holes with 3 1/2” from centre to centre.
INSIDE CORNER
For lighter duty applications where an outside corner is
not necessary.
46-1711K .............. 5 7/8” Leg length ................. 18.50
OUTSIDE CORNER
Use with backer plates or inside corners at outside ends
of docks.
46-1710K .................10” Leg length.................... 29.50
46-1711 46-1714
46-1710
FEMALE CORNER HINGE
Used with all styles of Male Connector Hinges.
46-1714K .................10” Leg length.................... 44.95
MALE CORNER HINGE
Use with all styles of Female Connector Hinges.
46-1713K .................10” Leg length.................... 48.95
46-1712
46-1713
FEMALE TEE CONNECTOR
Used with all styles of Male Connector Hinges.
46-1716K ..................5 1/4” length..................... 20.50
MALE TEE CONNECTOR
Use with all styles of Female Connector Hinges.
46-1715K..................5 1/4” length .................... 15.95
46-1718
46-1716 46-1715
46-1719
3/4” CONNECTOR PIN
Used to join male and female connectors.
46-1718K ......................3/4” Dia........................... 9.35
WASHER PLATE
Used on side of pipe holders, joist corners and chain
retainers.
46-1719K .................5 1/4” x 1 1/2”...................... 4.99
Dock Equipment & Acc.
INSIDE CORNER PIPE HOLDER
Sloted holes for various wood thicknesses. Holds dock in
place while allowing for tides or other water variances.
3” I.D. x 7” long pipe.
46-1721K.............8 1/4” Leg x 5 1/4”H ............... 72.95
SIDE PIPE HOLDER
Bolts to side of dock frame to anchor it in place yet
allows vertical movement for water variances.
3” I.D. x 7” long pipe.
46-1722K .......7 1/2” Leg length x 5 1/4”H.......... 45.95
DOCK EDGE PIPE AUGER
Pipe auger. Fits up to 2” O.D. pipe. Galvanized
46-1724K............................................................ 26.75
46-1717
ANCHOR CHAIN INSIDE CORNER
Offers maximum corner strength when used with
Outside Corner or any corner connecting hinge. Holds up
to 1/2” chain.
46-1712K ..................8 1/4” length..................... 34.95
CHAIN RETAINER
Holds chain up to 1/2” to secure the dock in position.
46-1717K .................6” L x 5 1/2” H .................... 33.95
46-1723
46-1720
INSIDE JOIST CORNER
Use to mount stringers with washer plates. Also use as a
backer plate to prevent cleats from pulling out.
46-1723K ...............2 1/2” Leg length.................... 9.99
BACKER PLATE
Used to sandwich wood framing when another piece of
hardware isn’t used. Prevents bolt loosening and pull
through.
46-1720K........5 1/4” x 5 1/4” (1/8” Thick)............. 7.35
PREMIUM MOORING WHIPS
Premium Whips feature an Exclusive “Plug & Socket”
design for quick and easy separation, Tie-off cleat and
NEW carbon fiber technology. Solid, cast aluminum base
with built-in cleat, ring and thumb screw. Unique tip
with functional roller and a tie-off cleat for easier boat
access. Simply release the whip line from the tie-off
cleat. The whip lines effortlessly roll through the pulley
at the tip causing the boat to gently approach the dock
for boarding. Patented cross-wound material. Double
braided nylon whip lines, spring lines and unique line
tensioner for one-handed set-up. Stainless steel
mounting hardware included.Set of two (2) whips
includes mooring lines, whip lines, tie-off cleats and
aluminum tensioners.
46-1750K...................8’ (2500 lbs) ................... 299.00
46-1751K..................12’ (5000 lbs) .................. 449.00
46-1752K ................14’ (10,000 lbs) ................. 515.00
46-1753K ................16’ (20,000 lbs) ................. 589.00
Prices are subject to change. Check our website for up to date prices. www.mercersmarine.com
243