ALUMINUM ELECTROLYTIC CAPACITORS

Vent
FD'
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Longer life, Downsized, 125C
@Downsized, low impedance and high-ripple current version of GXE
series
@For automobile modules and other high temperature applications
@Endurance with ripple current : 3,000 to 5,000 hours at 125C
@Solvent resistant type
@RoHS Compliant
?SPECIFICATIONS
Items Characteristics
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tane)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
Sleeve (PET : Brown)
-40 to +125C
?DIMENSIONS [mm]
@Terminal Code : E
25 to 50Vdc
P20% (M)
I=0.03CV or 4MA, whichever is greater.
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V)
Rated voltage (Vdc) 25 35 50
tanE (Max.)
0.14 0.12 0.10
When nominal capacitance exceeds 1,000MF, add 0.02 to the above value for each 1,000MF increase.
Rated voltage (Vdc)
Z(-25C)/Z(+20C)
Z(-40C)/Z(+20C)
L' 15min. 4min.
Please refer to "Product code guide (radial lead type)"
Fd
?PART NUMBERING SYSTEM
25
2
4
35
2
4
50
2
4
FP0.5
(at 20C, 120Hz)
(at 20C, 1 minute)
(at 20C, 120Hz)
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated ripple
current is applied for 5,000 hours (3,000 hours for 25L and less) at 125C.
Capacitance change [P30% of the initial value
D.F. (tanE) [300% of the initial specified value
Leakage current [The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1,000 hours at 125C without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change [P30% of the initial value
D.F. (tanE) [300% of the initial specified value
Leakage current [The initial specified value
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E G P A A A A E A A A A A M A A A S
Gas escape end seal
GXE
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 470MF:471, 1,000MF:102)
Lead forming·taping code
Terminal code
Voltage code (ex. 25V:250, 50V:500)
Series code
Category
Higher temperature
LXZ
(1/2)
Downsized
Higher ripple current
GPA
fD
fd
F
fD'
L'
12.5
0.6
5.0
14.5
0.8
7.5
16
0.8
7.5
FD+0.5max.
L+1.5max.
18
0.8
7.5
CAT. No. E1001H