ALUMINUM ELECTROLYTIC CAPACITORS

LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85C
@High ripple capability
@Endurance with ripple current : 5,000 hours at 85C
@Wide range of case sizes from F50 to F100
@RoHS Compliant
?SPECIFICATIONS
Items
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tane)
Low Temperature
Characteristics
Insulation Resistance
Insulation
Withstanding Voltage
Endurance
Shelf Life
F50 & F63.5 : G=6
F76 & F89 : G=5
F100 : G=10
?PART NUMBERING SYSTEM
Characteristics
-25 to +85C
350 to 450Vdc
P20% (M)
(at 20C, 120Hz)
I=0.02CV or 5mA, whichever is smaller.
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V)
(at 20C after 5 minutes)
0.25 max.
(at 20C, 120Hz)
Capacitance change C(-25C)/C(+20C)]0.7
(at 120Hz)
When measured between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering
the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100MO.
When a voltage of 2,000Vac is applied for 1 minute between the terminals that are connected to each other and to the mounting clamp
on the insulating sleeve covering the case, there shall not be electrical damage.
The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated
ripple current is applied for 5,000 hours at 85C.
Capacitance change [P20% of the initial value
D.F. (tanE) [200% of the initial specified value
Leakage current [The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 500 hours at 85C without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change [P20% of the initial value
D.F. (tanE) [200% of the initial specified value
Leakage current [The initial specified value
?DIMENSIONS (Screw-Mount) [mm]
@Terminal Code : LG
Sleeve (Pb-free PVC : Black)
Plastic disk
FP1
L+4max. GP1
FD+1.8max.
@Mounting Clamp Code : B
30°P5°
fD
50
63.5
76
AP1
WP1
* The screw and the mounting clamp are separately supplied and not attached to the product.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E R W F A A A L G N A A A M A A A M
A
78.0
90.0
104.5
4.5
BP1
6
B
64.0
76.0
90.0
W
68.0
80.0
93.5
F
22.4
28.0
31.5
RWG
Downsized
@Mounting Clamp Code : C
KP1
EP1
fD
50
63.5
76
89
100
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 6,800MF:682, 12,000MF:123)
Mounting clamp code (N, B, C)
Terminal code
Voltage code (ex. 350V:351, 400V:401)
Series code
Category
Please refer to "Product code guide (screw-mount terminal type)"
(1/2)
RWY
RWF
8
J
360°
3
4.5
E
32.5
38.1
44.5
50.8
56.5
Low price version
RWE
Longer life
K
37.0
43.5
50.0
56.5
63.4
45°P5°
F
22.4
28.0
31.5
31.5
41.5
J
14.0
14.0
14.0
16.0
18.0
F50 to F89
Plus hexagon-headed screw :
M5B0.8B10
Maximum screw tightening torque :
3.23Nm
F100
Cross-recessed head (phillips)
screw : M8B1.25B16
Spring washer
Washer
Maximum screw tightening torque :
6.31Nm
CAT. No. E1001H