PCD-Customs-Tools

More documents

Recommendations

Info

Format milling cutter D 30 NL 26 - solid wood / wood-based materialspkd-sonderwerkzeuge.de/sonderwerkzeuge/18414-02.htmlSizing / jointing cutter for solid woodTechnical detailsDiameter: 30mmUsable length 26mmShank: 25x55mmNumber of cutting edges: 2 + 2PCD equipment: 4mmSpeed: n - max: 30,000Cutting edge geometry: positive / negativeSuitable for formatting and joining solid wood and wood-based materials e.g.MultiplexSpecialty:Large circumference for high cutting speed and feed.. Z 2 + 2 suitable for solid wood, wooden materials, etc. - Clean edges on the top andBottom.
Format milling cutter D 35 NL 34 - solid wood / wood-based materialspkd-sonderwerkzeuge.de/sonderwerkzeuge/18414-04.htmlSizing / jointing cutter for solid woodTechnical detailsDiameter: 35mmUsable length 34 mmShank: 25x55mmNumber of cutting edges: 2 + 2PCD equipment: 4mmSpeed: n - max: 30,000Cutting edge geometry: positive / negativeSuitable for formatting and joining solid wood and wood-based materials e.g.MultiplexThis milling cutter can also be manufactured with a given barrel diameter, pleaseSpecify the radius for the desired barrel.Important: When using the barrel cutter in MDF, continuous cutting edges are oftenrequired better than split cutting edges, with split cutting edges there may be a line inthe sectional drawing.This doesn't matter with chipboard.
Page 1 and 2:
Automatically generated e-Catalog P
Page 3 and 4:
That happens in usually 2% of the f
Page 5 and 6:
Alternatives to the 3 jaw chuckHydr
Page 7 and 8:
Reducing sleeve D = 12 mm .pkd-sond
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Collet ER 40 (472E) .pkd-sonderwerk
Page 15 and 16:
Collet chuck ER 25 HSK63F .pkd-sond
Page 17 and 18:
Collet chuck ER 32 HSK63Fpkd-sonder
Page 19 and 20:
Collet chuck ER 50 HSK63Fpkd-sonder
Page 21 and 22:
Collet chuck HSK 63 F including acc
Page 23 and 24:
Face milling cutterMilling cutters
Page 25 and 26:
Engraving cutter or cut out corners
Page 27 and 28:
Ball roughing cutter D = 20mmpkd-so
Page 29 and 30:
The grooves become less when either
Page 31 and 32:
Aerotech dust-free CNC machining -
Page 33 and 34:
AER 35A HSK63 105mmpkd-sonderwerkze
Page 35 and 36:
Aerotech Hydro D16 - Nesting Chipbo
Page 37 and 38:
Aerotech Hydro D25 - wood-based mat
Page 39 and 40:
Aerotech Hydro D25 + separatorpkd-s
Page 41 and 42:
Aerotech Hydro Plus AER41F D105pkd-
Page 43 and 44:
Aerotech System 7 wings - plasterbo
Page 45 and 46:
Aerotech System 9 wings - nesting o
Page 47 and 48:
The Aerotech System is a monolithic
Page 49 and 50:
JEC innovation for composite proces
Page 51 and 52:
Relief and support of existing suct
Page 53 and 54:
Aerotech Universal + Separator - Pa
Page 55 and 56:
PCD drills and PCD countersinkspkd-
Page 57 and 58:
Hardware drill with chip breaker D
Page 59 and 60:
D40 countersink drill bit for plywo
Page 61 and 62:
Diamond drill 3mm with clamping sur
Page 63 and 64:
For sensitive surfaces and high cut
Page 65 and 66:
Milling cutter with countersink D12
Page 67 and 68:
PCD drill D10 for carbon with coola
Page 69 and 70:
PCD drill D9.5pkd-sonderwerkzeuge.d
Page 71 and 72:
PCD countersink 90 ° - D 2.5pkd-so
Page 73 and 74:
PCD full head drill Z 2 with coolan
Page 75 and 76:
PCD full head drill Z 3 with coolan
Page 77 and 78:
HSS drill bit HM equipped with or w
Page 79 and 80:
Fig. 1This is also an advantage for
Page 81 and 82:
Specialty:The advantage of a PCD mi
Page 83 and 84:
Suitable for use in a hand router o
Page 85 and 86:
Also for flush milling of CFRP or c
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
DIA flush milling cutter with guide
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
DIA router Z 2 NL 25 shank 8mmpkd-s
Page 99 and 100:
DIA trimming cutter with guide ring
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Individual face milling cutters up
Page 107 and 108:
Face milling cutter D80 Z4 for comp
Page 109 and 110:
Face milling cutter D80 Z8 for alum
Page 111 and 112:
Face milling cutter D120 Z4 - posit
Page 113 and 114:
Face milling cutter D180 Z8 - incl.
Page 115 and 116:
D220 Z 4 face milling cutter includ
Page 117 and 118:
Face milling cutter D 300, Z2 inclu
Page 119 and 120:
Face milling cutter for carbon / co
Page 121 and 122:
Face milling cutter for V = 60 m /
Page 123 and 124:
PCD saw blades for difficult materi
Page 125 and 126:
4 + 1 - saw blade D210 Z60 FZ, WZpk
Page 127 and 128:
4 + 1 saw blade D300 Z84 FZ, WZpkd-
Page 129 and 130:
Diamond cutting disc D250mm carbon
Page 131 and 132:
Diamond saw 300x2.2 / 1.3x30 Z 60 W
Page 133 and 134:
Diamond saw D300 Z 12 WZ, cutting w
Page 135 and 136:
Diamond saw fiber cement - FR / TR
Page 137 and 138:
Whisper saw for Eternitpkd-sonderwe
Page 139 and 140:
Why nesting saw?As a rule, a "stand
Page 141 and 142:
The lamella groove is milled with t
Page 143 and 144:
PCD combination saw D 280 Z 60 WZ c
Page 145 and 146:
PCD saw D 350, Z 48, WZ for circula
Page 147 and 148:
SpecialtyPCD mixture for composites
Page 149 and 150:
Saw blade D300 Z32 WZpkd-sonderwerk
Page 151 and 152:
This saw blade can be re-sharpened
Page 153 and 154:
Small money, big performance PCD jo
Page 155:
Double end tenoner - hogger Z 72 wi
Page 158 and 159:
Jointing cutter D125 Z3 + 3 TH 34pk
Page 160 and 161:
Jointing cutter D180 Z2 + 2pkd-sond
Page 162 and 163:
Jointing cutter D180 Z2 + 2 TH 35pk
Page 164 and 165:
Jointing cutter D180 Z3 + 3 TH29pkd
Page 166 and 167:
Specialty:Also available with other
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
Combination chipper with saw for do
Page 177 and 178:
Compact hogger Z 6, D 80, width 10.
Page 179 and 180:
Hogger Z 60 width 26 mm with flange
Page 181 and 182:
Fold 90 ° V groove cutter / chamfe
Page 183 and 184:
135 ° -137 ° groove cutter / Aluc
Page 185 and 186:
Flattening cutter for MDFpkd-sonder
Page 187 and 188:
Specialty:Due to the overhang, a th
Page 189 and 190:
Rebate cutter (HSK20C) for plasterb
Page 191 and 192:
Rebate with bevel (HSK20C) for plas
Page 193 and 194:
Bevel shoulder lower edge (HSK20C)
Page 195 and 196:
Chamfer cutter for aluminum D10 NL2
Page 197 and 198:
Folding & miter cutter Z2 + 2 for w
Page 199 and 200:
Folding cutter 90 ° for folding ch
Page 201 and 202:
Folding cutter for nesting Z2 + 2 -
Page 203 and 204:
Format milling cutter D 16 NL 26 -
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
This milling cutter can also be man
Page 211 and 212:
Page 213 and 214:
Milling cutter D6 NL 5 carbon / fib
Page 215 and 216:
Milling cutter D32 with coolant hol
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Jointing cutter (HSK20C) D16 Z3 for
Page 223 and 224:
Jointing cutter (HSK20C) for plaste
Page 225 and 226:
Annotation:Tool shank with interfac
Page 227 and 228:
Also available as Z 3 + 3 on reques
Page 229 and 230:
Slot iron (HSK20C) D50 Z8 for therm
Page 231 and 232:
Fold groove cutter / chamfer cutter
Page 233 and 234:
Groove cutter, flat dowel cutter Z
Page 235 and 236:
Grooving cutter for narrow surfaces
Page 237 and 238:
Grooving cutter (HSK20C) D16, depth
Page 239 and 240:
Groove cutter with shank D12 depth
Page 241 and 242:
Groove cutter "wave" for solid wood
Page 243 and 244:
Groove with a round base (HSK20C) f
Page 245 and 246:
Groove connection cutter for parque
Page 248 and 249:
PCD chamfer cutter 90 ° Z 2pkd-son
Page 250 and 251:
Milling cutter bevel - Z 2 Trespa /
Page 252 and 253:
Profile milling cutter for aluminum
Page 254 and 255:
R6 ball end mill carbon / fiberglas
Page 256 and 257:
R10 ball mill carbon / fiberglasspk
Page 258 and 259:
Heavy metal meets aluminumA heavy m
Page 260 and 261:
Radius cutter R 7 - diamond cutting
Page 262 and 263:
Radius cutter D 110 Z 2 + 2pkd-sond
Page 265 and 266:
Roughing cutter D50 NL50 - positive
Page 267 and 268:
Special milling cutter for aluminum
Page 269 and 270:
Special milling cutter for round sp
Page 271 and 272:
Special milling cutter (HSK20C) con
Page 273 and 274:
Special milling cutter with barrel
Page 275 and 276:
Trowel cutter 45 ° (HSK20C) D16 /
Page 277 and 278:
Trowel cutter 45 ° (HSK20C) D16 /
Page 279 and 280:
Trowel cutter 45 ° with shank D10
Page 281 and 282: Grooving cutter for plasterboard -
Page 283 and 284: Grooving cutter with two angles (HS
Page 285 and 286: Grooving cutter with two angles (HS
Page 287 and 288: Tool holder for tools with HSK20C a
Page 289 and 290: Barrel cutter for wood materialspkd
Page 291 and 292: Trapezoidal cutter with diamond cut
Page 293 and 294: V-groove cutter (HSK20C) 135 ° - D
Page 295 and 296: V-groove cutter (HSK20C) D15 depth
Page 297 and 298: Tool holder for tools with HSK20C a
Page 299 and 300: Connection cutter spring D47pkd-son
Page 301 and 302: Tool holder HSK20Cpkd-sonderwerkzeu
Page 303 and 304: Z 2 grooving cutter with throat arc
Page 305 and 306: Note: Due to the size of the millin
Page 307 and 308: Technical detailsDiameter: 15.4 mmU
Page 309 and 310: Diameter: 24 mmUsable length: 7.2 m
Page 311 and 312: Diamond milling cutter PCD Z3 D25 N
Page 313 and 314: Rebate cutter (HSK20C) for plasterb
Page 315 and 316: Rebate cutter (HSK20C) for plasterb
Page 317 and 318: Bevel shoulder top edge (HSK20C) fo
Page 319 and 320: Chamfer cutter 30 ° Z1pkd-sonderwe
Page 321 and 322: Chamfer cutter 40 ° Z1 for Trespa
Page 323 and 324: Diamond mixture for long tool life
Page 325 and 326: Folding milling cutter for 5-axis C
Page 327 and 328: High-performance PCD for long tool
Page 329 and 330: Format milling cutter D 16 NL 34 -
Page 331: Format milling cutter D 25 NL 54 -
Page 335 and 336: Format milling cutter D 45 NL 44 -
Page 337 and 338: Milling cutter D6 NL 5 carbon / fib
Page 339 and 340: Milling cutter D16 NL7 for aluminum
Page 341 and 342: Milling cutter with chamfer for alu
Page 343 and 344: Milling cutter with countersink D12
Page 345 and 346: Milling cutter Z2 with bevel on bot
Page 347 and 348: Jointing cutter (HSK20C) for plaste
Page 349 and 350: Plasterboard milling cutter (HSK20C
Page 351 and 352: Plasterboard cutter (HSK20C) for pl
Page 353 and 354: Ball mill (HSK20C) for plasterpkd-s
Page 355 and 356: Groove cutter - composite (coated h
Page 357 and 358: Fold groove cutter / chamfer cutter
Page 359 and 360: Groove cutter, flat dowel cutter Z
Page 361 and 362: Grooving cutter for narrow surfaces
Page 363 and 364: Grooving cutter (HSK20C) D16, depth
Page 365 and 366: Groove cutter with shank D12 depth
Page 367 and 368: Groove cutter "wave" for solid wood
Page 369 and 370: Groove with a round base (HSK20C) f
Page 371 and 372: Groove connection cutter for parque
Page 374 and 375: PCD chamfer cutter 90 ° Z 2pkd-son
Page 376 and 377: PCD special tools - quick planning,
Page 378 and 379: Profile cutter for aluminum - Edge
Page 380 and 381: R3 ball mill carbon / fiberglasspkd
show all

PCD-Customs-Tools

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?